Nikon Z 50mm F1.2S
| Principal specifications | ||
|---|---|---|
| Lens type | Prime lens | |
| Max Format size | 35mm FF | |
| Focal length | 50 mm | |
| Image stabilization | No | |
| Lens mount | Nikon Z | |
| Aperture | ||
| Maximum aperture | F1.2 | |
| Minimum aperture | F16 | |
| Aperture ring | No | |
| Number of diaphragm blades | 9 | |
| Optics | ||
| Elements | 17 | |
| Groups | 15 | |
| Special elements / coatings | 2 ED + 3 aspherical elements, Arneo + Nano Crystal coatings | |
| Focus | ||
| Minimum focus | 0.45 m (17.72″) | |
| Maximum magnification | 0.15× | |
| Autofocus | Yes | |
| Motor type | Stepper motor | |
| Full time manual | Yes | |
| Focus method | Internal | |
| Distance scale | Yes | |
| DoF scale | Yes | |
| Physical | ||
| Weight | 1090 g (2.40 lb) | |
| Diameter | 90 mm (3.54″) | |
| Length | 150 mm (5.91″) | |
| Materials | Magnesium alloy | |
| Sealing | Yes | |
| Colour | Black | |
| Filter thread | 82 mm | |
| Hood supplied | Yes | |
| Other | ||
Canon RF 15-35mm F/2.8 L IS USM
| Principal specifications | ||
|---|---|---|
| Lens type | Zoom lens | |
| Max Format size | 35mm FF | |
| Focal length | 15–35 mm | |
| Image stabilization | Yes | |
| CIPA Image stabilization rating | 5 stop(s) | |
| Lens mount | Canon RF | |
| Aperture | ||
| Maximum aperture | F2.8 | |
| Aperture ring | No | |
| Number of diaphragm blades | 9 | |
| Optics | ||
| Elements | 16 | |
| Groups | 12 | |
| Special elements / coatings | 3 aspherical + 2 UD elements | |
| Focus | ||
| Minimum focus | 0.28 m (11.02″) | |
| Maximum magnification | 0.21× | |
| Autofocus | Yes | |
| Motor type | Nano ultrasonic | |
| Full time manual | Yes | |
| Focus method | Internal | |
| Distance scale | No | |
| DoF scale | No | |
| Physical | ||
| Weight | 840 g (1.85 lb) | |
| Diameter | 89 mm (3.5″) | |
| Length | 127 mm (5″) | |
| Materials | Magnesium alloy | |
| Sealing | Yes | |
| Colour | Black | |
| Zoom method | Rotary (extending) | |
| Power zoom | No | |
| Filter thread | 82 mm | |
| Hood supplied | Yes | |
| Other | ||
Canon RF 50mm F/1.2 L USM
| Principal specifications | ||
|---|---|---|
| Lens type | Prime lens | |
| Max Format size | 35mm FF | |
| Focal length | 50 mm | |
| Image stabilization | No | |
| Lens mount | Canon RF | |
| Aperture | ||
| Maximum aperture | F1.2 | |
| Minimum aperture | F16 | |
| Aperture ring | No | |
| Number of diaphragm blades | 10 | |
| Optics | ||
| Elements | 15 | |
| Groups | 9 | |
| Special elements / coatings | Ground aspherical + aspherical + UD elements, Air Sphere and fluorine coatings | |
| Focus | ||
| Minimum focus | 0.40 m (15.75″) | |
| Maximum magnification | 0.19× | |
| Autofocus | Yes | |
| Motor type | Ring-type ultrasonic | |
| Full time manual | Yes | |
| Focus method | Internal | |
| Distance scale | No | |
| DoF scale | No | |
| Physical | ||
| Weight | 950 g (2.09 lb) | |
| Diameter | 90 mm (3.54″) | |
| Length | 108 mm (4.25″) | |
| Sealing | Yes | |
| Colour | Black | |
| Filter thread | 77 mm | |
| Other | ||
Saramonic Wireless Blink 500 Pro B5 (Type-C)
• Dual channel receiver for USB-C devices
• Portable charging case for transmitter and receiver
• Exceptional and broadcast-quality sound
• Ideal for video production, vlogging, mobile journalism and much more
• Quick pairing and easy to get start
• Built-in microphone and an extra SR-M1 lavalier microphone included
• High-contrast OLED display on the transmitter
• LINE IN/MIC input switchable
• Headphone monitoring available
Blink500 Pro TX
| Transmission Type: | 2.4GHz Digital Frequency |
| Modulation: | GFSK |
| Operating Range: | Up to 328′(100m) |
| RF Output Power: | 10mW |
| Polar Pattern: | Omnidirectional |
| Frequency Response: | 50Hz-18KHz |
| Maximum SPL: | Built-in Microphone:120dB SPL
Lavalier Microphone: 110dB SPL |
| Sensitivity: | Built-in Microphone: -39dB
Lavalier Microphone: -39dB |
| SNR: | ＞78dB |
| Reference audio input level: | -30～42dBv MIC input,0 dB attenuation |
| Power Requirements: | Built-in Li-ion Battery or
Micro USB DC 5V or Charging Contact |
| Other Functions: | Mute function High-contrast OLED Display |
| Built-in Battery Life: | Approx.8 hours |
| Antenna: | PIFA Antenna |
| Audio Inputs: | 3.5mm TRS Lavalier Mic/
Line- in Input or Built – in Microphone |
| Weight: | Approx. 32g(1.13oz) |
| Dimensions: | 56.5×38×26.1mm |
| Operating Temperature: | 0℃ to 50℃ |
| Storage Temperature: | -20℃ to +55℃ |
Blink500 Pro RXUC
| Transmission Type: | 2.4GHz Digital Frequency |
| Modulation: | GFSK |
| Operating Range: | Up to 328′(100m) |
| Audio Output Connector | USB-C Connector |
| Power Requirements | Supplied by USB-C Devices |
| Other functions | 3.5mm headphone jack,Mono/Stereo switch |
| Antenna | PIFA Antenna |
| Weight | Approx.16.5g(0.58oz) |
| Dimensions | 31×82×12mm |
| Operating Temperature | 0℃ to 50℃ |
| Storage Temperature | -20℃ to +55℃ |
Blink500 Pro Charging Case
| Power Requirements | Powered by USB-C port (5V/1.5A) |
| Power Capacity | 2000mAh |
| Charging Time | 3 hours |
| Weight | 200g (9.45 oz) |
| Dimensions | 123×102×39.7mm |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | –20°C to +55°C |
Blink500 Pro B5(1×Blink500 Pro RXUC + 1×Blink500 Pro TX)
1×Blink500 Pro RXUC Receiver with USB-C Connector
1×Blink500 Pro TX Transmitter with OLED Display and Built-In Microphone
1×Blink500 Pro B5 Box Charging Case
1×Zipper Bag
1×1′(30.5cm)Gold-Plated USB-C to USB-A Charging Cable
1×1′(30.5cm)Gold-Plated Micro USB to USB-A Charging Cable
1×SR-M1 Omnidirectional Lavalier Microphone
1×Alligator-Style Lavalier Microphone Clip
1×Foam Lavalier Windscreen
1×Warranty Card
1×User Manual
Saramonic Wireless Blink 500 Pro B3 (Lightning)
Blink500 Pro RXDi
| Transmission Type: | 2.4GHz Digital Frequency |
| Modulation: | GFSK |
| Operating Range: | Up to 328′(100m) |
| Audio Output Connector | MFi Certified Lightning connector |
| Power Requirements | Supplied by iOS Devices |
| Other functions | 3.5mm headphone jack,Mono/Stereo switch |
| Antenna | PiFA Antenna |
| Weight | Approx. 16.5g(0.58oz) |
| Dimensions | 31×82×12mm |
| Operating Temperature | 0℃ to 50℃ |
| Storage Temperature | -20℃ to 55℃ |
Blink500 Pro TX
| Transmission Type: | 2.4GHz Digital Frequency |
| Modulation: | GFSK |
| Operating Range: | Up to 328′(100m) |
| RF Output Power: | 10mW |
| Polar Pattern: | Omnidirectional |
| Frequency Response: | 50Hz-18KHz |
| Maximum SPL: | Built-in Microphone:120dB SPL
Lavalier Microphone: 110dB SPL |
| Sensitivity: | Built-in Microphone: -39dB
Lavalier Microphone: -39dB |
| SNR: | ＞78dB |
| Reference audio input level: | -30～42dBv MIC input,0 dB attenuation |
| Power Requirements: | Built-in Li-ion Battery or
Micro USB DC 5V or Charging Contact |
| Other Functions: | Mute function High-contrast OLED Display |
| Built-in Battery Life: | Approx.8 hours |
| Antenna: | PIFA Antenna |
| Audio Inputs: | 3.5mm TRS Lavalier Mic/
Line- in Input or Built – in Microphone |
| Weight: | Approx. 32g(1.13oz) |
| Dimensions: | 56.5×38×26.1mm |
| Operating Temperature: | 0℃ to 50℃ |
| Storage Temperature: | -20℃ to +55℃ |
Blink500 Pro BOX Charging Case
| Power Requirements | Powered by USB-C port (5V/1.5A) |
| Power Capacity | 2000mAh |
| Charging Time | 3 hours |
| Weight | 200g (7.05 oz) |
| Dimensions | 123×102×39.7mm |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | –20°C to +55°C |
Saramonic Dual Wireless Blink 500 Pro B6 (Type-C)
• Dual channel receiver for USB-C devices
• Portable charging case for transmitters and receiver
• Exceptional and broadcast-quality sound
• Ideal for video production, vlogging, mobile journalism and much more
• Quick pairing and easy to get start
• Built-in microphone and two extra SR-M1 lavalier microphones included
• High-contrast OLED display on the transmitters
• Mono/Stereo switchable
• LINE IN/MIC input switchable
• Headphone monitoring available
Blink500 Pro TX
| Transmission Type: | 2.4GHz Digital Frequency |
| Modulation: | GFSK |
| Operating Range: | Up to 328′(100m) |
| RF Output Power: | 10mW |
| Polar Pattern: | Omnidirectional |
| Frequency Response: | 50Hz-18KHz |
| Maximum SPL: | Built-in Microphone:120dB SPL
Lavalier Microphone: 110dB SPL |
| Sensitivity: | Built-in Microphone: -39dB
Lavalier Microphone: -39dB |
| SNR: | ＞78dB |
| Reference audio input level: | -30～42dBv MIC input,0 dB attenuation |
| Power Requirements: | Built-in Li-ion Battery or
Micro USB DC 5V or Charging Contact |
| Other Functions: | Mute function High-contrast OLED Display |
| Built-in Battery Life: | Approx.8 hours |
| Antenna: | PIFA Antenna |
| Audio Inputs: | 3.5mm TRS Lavalier Mic/
Line- in Input or Built – in Microphone |
| Weight: | Approx. 32g(1.13oz) |
| Dimensions: | 56.5×38×26.1mm |
| Operating Temperature: | 0℃ to 50℃ |
| Storage Temperature: | -20℃ to +55℃ |
Blink500 Pro RXUC
| Transmission Type: | 2.4GHz Digital Frequency |
| Modulation: | GFSK |
| Operating Range: | Up to 328′(100m) |
| Audio Output Connector | USB-C Connector |
| Power Requirements | Supplied by USB-C Devices |
| Other functions | 3.5mm headphone jack,Mono/Stereo switch |
| Antenna | PIFA Antenna |
| Weight | Approx.16.5g(0.58oz) |
| Dimensions | 31×82×12mm |
| Operating Temperature | 0℃ to 50℃ |
| Storage Temperature | -20℃ to +55℃ |
Blink500 Pro Charging Case
| Power Requirements | Powered by USB-C port (5V/1.5A) |
| Power Capacity | 3000mAh |
| Charging Time | 4 hours |
| Weight | 268g (9.45 oz) |
| Dimensions | 165.8×102.9×39.7mm |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | –20°C to +55°C |
Saramonic Dual Wireless Blink 500 Pro B4 (Lightning)
Saramonic Dual Wireless Blink 500 Pro B4 (Lightning)
• Dual channel receiver for iOS Lightning devices
• Portable charging case for transmitters and receiver
• Exceptional and broadcast-quality sound
• Ideal for video production, vlogging, mobile journalism and much more
• Quick pairing and easy to get start
• Built-in microphone and two extra SR-M1 lavalier microphones included
• High-contrast OLED display on the transmitters
• Mono/Stereo switchable
• LINE IN/MIC input switchable
• Headphone monitoring available
Blink500 Pro RXDi
| Transmission Type: | 2.4GHz Digital Frequency |
| Modulation: | GFSK |
| Operating Range: | Up to 328′(100m) |
| Audio Output Connector | MFi Certified Lightning connector |
| Power Requirements | Supplied by iOS Devices |
| Other functions | 3.5mm headphone jack,Mono/Stereo switch |
| Antenna | PiFA Antenna |
| Weight | Approx. 16.5g(0.58oz) |
| Dimensions | 31×82×12mm |
| Operating Temperature | 0℃ to 50℃ |
| Storage Temperature | -20℃ to 55℃ |
Blink500 Pro TX
| Transmission Type: | 2.4GHz Digital Frequency |
| Modulation: | GFSK |
| Operating Range: | Up to 328′(100m) |
| RF Output Power: | 10mW |
| Polar Pattern: | Omnidirectional |
| Frequency Response: | 50Hz-18KHz |
| Maximum SPL: | Built-in Microphone:120dB SPL
Lavalier Microphone: 110dB SPL |
| Sensitivity: | Built-in Microphone: -39dB
Lavalier Microphone: -39dB |
| SNR: | ＞78dB |
| Reference audio input level: | -30～42dBv MIC input,0 dB attenuation |
| Power Requirements: | Built-in Li-ion Battery or
Micro USB DC 5V or Charging Contact |
| Other Functions: | mute function High-contrast OLED Display |
| Built-in Battery Life: | Approx.8 hours |
| Antenna: | PIFA Antenna |
| Audio Inputs: | 3.5mm TRS Lavalier Mic/
Line- in Input or Built – in Microphone |
| Weight: | Approx. 32g(1.13oz) |
| Dimensions: | 56.5×38×26.1mm |
| Operating Temperature: | 0℃ to 50℃ |
| Storage Temperature: | -20℃ to +55℃ |
Blink500 Pro BOX Charging Case
| Power Requirements | Powered by USB-C port (5V/1.5A) |
| Power Capacity | 3000mAh |
| Charging Time | 4 hours |
| Weight | 268g (9.45 oz) |
| Dimensions | 165.8×102.9×39.7mm |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | –20°C to +55°C |
Saramonic Wireless Blink 500 B3 (Lightning)
Blink500 TX
| Transmission Type: | 2.4GHz Digital Frequency |
| Modulation: | GFSK |
| Operating Range: | Up to 164′ (50m) |
| RF Output Power: | 10mW |
| Polar Pattern: | Omnidirectional |
| Frequency Response: | 50Hz-18KHz |
| Maximum SPL: | Built-in Microphone:120dB SPL Lavalier Microphone: 110dB SPL |
| Sensitivity: | Built-in Microphone: -42dB Lavalier Microphone: -30dB |
| SNR: | ＞78dB |
| Power Requirements: | Built-in Li-ion Battery or USB-C DC 5V |
| Built-in Battery Life: | Approx. 6 hours |
| Antenna: | PIFA Antenna |
| Audio Inputs: | 3.5mm TRS Lavalier Microphone Input
or Built-in Microphone |
| Weight: | Approx. 34g (1.2oz) |
| Dimensions: | 63×43×16.5mm |
| Operating Temperature: | 0°C to 50°C |
| Storage Temperature: | –20°C to +55°C |
Blink500 RXDi
| Transmission Type: | 2.4GHz Digital Frequency |
| Modulation: | GFSK |
| Operating Range: | Up to 164′ (50m) |
| Audio Output Connector: | MFi Certified Lightning Connector |
| Power Requirement: | Supplied by iOS Device |
| Antenna: | PIFA Antenna |
| Weight: | Approx. 11g (0.38oz) |
| Dimensions: | 76×16.5×11mm |
| Operating Temperature: | 0°C to 50°C |
| Storage Temperature: | –20°C to +55°C |
Saramonic Wireless Blink 500 B5 (Type-C)
Blink500 TX
| Transmission Type: | 2.4GHz Digital Frequency |
| Modulation: | GFSK |
| Operating Range: | Up to 164′ (50m) |
| RF Output Power: | 10mW |
| Polar Pattern: | Omnidirectional |
| Frequency Response: | 50Hz-18KHz |
| Maximum SPL: | Built-in Microphone:120dB SPL Lavalier Microphone: 110dB SPL |
| Sensitivity: | Built-in Microphone: -42dB Lavalier Microphone: -30dB |
| SNR: | ＞78dB |
| Power Requirements: | Built-in Li-ion Battery or USB-C DC 5V |
| Built-in Battery Life: | Approx. 6 hours |
| Antenna: | PIFA Antenna |
| Audio Inputs: | 3.5mm TRS Lavalier Microphone Input
or Built-in Microphone |
| Weight: | Approx. 34g (1.2oz) |
| Dimensions: | 63×43×16.5mm |
| Operating Temperature: | 0°C to 50°C |
| Storage Temperature: | –20°C to +55°C |
Blink500 RXUC
| Transmission Type: | 2.4GHz Digital Frequency |
| Modulation: | GFSK |
| Operating Range: | Up to 164′ (50m) |
| Audio Output Connector: | USB-C Connector |
| Power Requirement: | Supplied by USB-C Device |
| Antenna: | PIFA Antenna |
| Weight: | Approx. 10.5g (0.37oz) |
| Dimensions: | 76×16.5×11mm |
| Operating Temperature: | 0°C to 50°C |
| Storage Temperature: | –20°C to +55°C |
1× Blink500 RXUC Receiver with USB-C Connector
1× Blink500 TX Transmitter with Built-In Microphone and Clip
1× SR-M1 Omnidirectional Lavalier Microphones
1× Alligator-Style Lavalier Microphone Clip
1× Foam Lavalier Windscreen
1× 1’ (30.5 cm) Gold-Plated USB-C to USB-A Charging Cable
1× Pairing Pin
1× Warranty Card
1× User Manual
Saramonic Dual Wireless Blink 500 B6 (Type-C)
Blink500 TX
| Transmission Type: | 2.4GHz Digital Frequency |
| Modulation: | GFSK |
| Operating Range: | Up to 164′ (50m) |
| RF Output Power: | 10mW |
| Polar Pattern: | Omnidirectional |
| Frequency Response: | 50Hz-18KHz |
| Maximum SPL: | Built-in Microphone:120dB SPL Lavalier Microphone: 110dB SPL |
| Sensitivity: | Built-in Microphone: -42dB Lavalier Microphone: -30dB |
| SNR: | ＞78dB |
| Power Requirements: | Built-in Li-ion Battery or USB-C DC 5V |
| Built-in Battery Life: | Approx. 6 hours |
| Antenna: | PIFA Antenna |
| Audio Inputs: | 3.5mm TRS Lavalier Microphone Input
or Built-in Microphone |
| Weight: | Approx. 34g (1.2oz) |
| Dimensions: | 63×43×16.5mm |
| Operating Temperature: | 0°C to 50°C |
| Storage Temperature: | –20°C to +55°C |
Blink500 RXUC
| Transmission Type: | 2.4GHz Digital Frequency |
| Modulation: | GFSK |
| Operating Range: | Up to 164′ (50m) |
| Audio Output Connector: | USB-C Connector |
| Power Requirement: | Supplied by USB-C Device |
| Antenna: | PIFA Antenna |
| Weight: | Approx. 10.5g (0.37oz) |
| Dimensions: | 76×16.5×11mm |
| Operating Temperature: | 0°C to 50°C |
| Storage Temperature: | –20°C to +55°C |
1× Blink500 RXUC Receiver with USB-C Connector
2× Blink500 TX Transmitters with Built-In Microphone and Clip
2× SR-M1 Omnidirectional Lavalier Microphones
2× Alligator-Style Lavalier Microphone Clips
2× Foam Lavalier Windscreens
2× 1’ (30.5 cm) Gold-Plated USB-C to USB-A Charging Cables
1× Pairing Pin
1× Warranty Card
1× User Manual
Saramonic Wireless UWMIC9 Kit 2 (RX9 + 2TX9)
Transmitter
| Channels: | 96 |
| Groups: | A or B |
| Oscillator Type: | PLL Synthesizer |
| Frequency Range: | 514 MHz – 596 MHz |
| Reference Deviation: | +/- 5 kHz (-60dBV, 1kHz input) |
| Signal to Noise Ratio: | 70 dB or more |
| Spur Suppression: | -60 dB |
| Voice Delay: | 12 ms |
| Antenna: | 1/4λ wire antenna |
| Audio input connector: | TX9:3.5mm mini jack
HU9: none TX-XLR9: XLR-3-11C type (female) |
| Reference audio input level: | -60dBV (MIC input, 0dB attenuation) |
| Distortion: | 0.5% or less |
| Weight: | TX9: Approx. 211.4g (excluding batteries)
HU9: Approx. 338.2g (excluding batteries) TX-XLR9: Approx. 138g (Excluding batteries) |
| Battery: | Two AA size batteries |
| Dimensions: | TX9: 170.9 x 63.5 x 30.0 mm HU9: 254.0 x 52.0 x 52.0 mm TX-XLR9: 105.5 x 43 x 34.7 mm |
| Operating temperature: | 0℃ to 50℃ |
| Storage temperature: | -20℃ to +55℃ |
Receiver
| Channels: | 96 |
| Groups: | A or B |
| Oscillator Type: | PLL Synthesizer |
| Audio output connector: | 3.5mm mini jack |
| Antenna: | 1/4λ wire antenna |
| Audio output level: | -60dBV |
| Headphone output level: | 30mW (16Ω) |
| Receiver frequencies: | 514 MHz – 596 MHz |
| Signal to Noise Ratio: | 70 dB or more |
| Voice Delay: | 12 ms |
| Reference Deviation: | +/- 5 kHz (-60dBV, 1kHz input) |
| Frequency response: | 40Hz to 18kHz (+/-3dB) |
| Distortion: | 0.5% or less |
| Spur Suppression: | -60 dB |
| Weight: | 218.7g (Excluding batteries) |
| Battery: | Two AA size batteries |
| Dimensions: | 170.9 x 63.5 x 30.0 mm |
| Operating temperature: | 0℃ to 50℃ |
| Storage temperature: | -20℃ to +55℃ |
Saramonic Wireless UWMIC9 (RX9 + TX9)
Transmitter
| Channels: | 96 |
| Groups: | A or B |
| Oscillator Type: | PLL Synthesizer |
| Frequency Range: | 514 MHz – 596 MHz |
| Reference Deviation: | +/- 5 kHz (-60dBV, 1kHz input) |
| Signal to Noise Ratio: | 70 dB or more |
| Spur Suppression: | -60 dB |
| Voice Delay: | 12 ms |
| Antenna: | 1/4λ wire antenna |
| Audio input connector: | TX9:3.5mm mini jack
HU9: none TX-XLR9: XLR-3-11C type (female) |
| Reference audio input level: | -60dBV (MIC input, 0dB attenuation) |
| Distortion: | 0.5% or less |
| Weight: | TX9: Approx. 211.4g (excluding batteries)
HU9: Approx. 338.2g (excluding batteries) TX-XLR9: Approx. 138g (Excluding batteries) |
| Battery: | Two AA size batteries |
| Dimensions: | TX9: 170.9 x 63.5 x 30.0 mm HU9: 254.0 x 52.0 x 52.0 mm TX-XLR9: 105.5 x 43 x 34.7 mm |
| Operating temperature: | 0℃ to 50℃ |
| Storage temperature: | -20℃ to +55℃ |
Receiver
| Channels: | 96 |
| Groups: | A or B |
| Oscillator Type: | PLL Synthesizer |
| Audio output connector: | 3.5mm mini jack |
| Antenna: | 1/4λ wire antenna |
| Audio output level: | -60dBV |
| Headphone output level: | 30mW (16Ω) |
| Receiver frequencies: | 514 MHz – 596 MHz |
| Signal to Noise Ratio: | 70 dB or more |
| Voice Delay: | 12 ms |
| Reference Deviation: | +/- 5 kHz (-60dBV, 1kHz input) |
| Frequency response: | 40Hz to 18kHz (+/-3dB) |
| Distortion: | 0.5% or less |
| Spur Suppression: | -60 dB |
| Weight: | 218.7g (Excluding batteries) |
| Battery: | Two AA size batteries |
| Dimensions: | 170.9 x 63.5 x 30.0 mm |
| Operating temperature: | 0℃ to 50℃ |
| Storage temperature: | -20℃ to +55℃ |
Saramonic Wireless Blink 500 Pro B2
Blink500 Pro RX
| Transmission Type: | 2.4GHz Digital Frequency |
| Modulation: | GFSK |
| Operating Range: | Up to 328′(100m) |
| Audio Output Connector: | 3.5mm jack |
| Audio Output level: | –60 dBV to -20dBV |
| Power Requirements: | Built-in Li-ion Battery or
Micro USB DC 5V or Charging Contact |
| Headphone jack: | 3.5mm |
| Built-In Battery Life: | Approx.8 hours |
| Antenna: | PIFA Antenna |
| Weight: | Approx. 32g(1.13oz) |
| Dimensions: | 56×38×29.4mm |
| Operating Temperature: | 0℃ to 50℃ |
| Storage Temperature: | -20℃ to +55℃ |
Blink500 Pro TX
| Transmission Type: | 2.4GHz Digital Frequency |
| Modulation: | GFSK |
| Operating Range: | Up to 328′(100m) |
| RF Output Power: | 10mW |
| Polar Pattern: | Omnidirectional |
| Frequency Response: | 50Hz-18KHz |
| Maximum SPL: | Built-in Microphone:120dB SPL
Lavalier Microphone: 110dB SPL |
| Sensitivity: | Built-in Microphone: -39dB
Lavalier Microphone: -39dB |
| SNR: | ＞78dB |
| Reference audio input level: | -30～42dBv MIC input,0 dB attenuation |
| Power Requirements: | Built-in Li-ion Battery or
Micro USB DC 5V or Charging Contact |
| Built-in Battery Life: | Approx.8 hours |
| Antenna: | PIFA Antenna |
| Audio Inputs: | 3.5mm TRS Lavalier Mic/Line
– in Input or Built – in Microphone |
| Weight: | Approx. 32g(1.13oz) |
| Dimensions: | 56.5×38×26.1mm |
| Operating Temperature: | 0℃ to 50℃ |
| Storage Temperature: | -20℃ to +55℃ |
Blink500 Pro Charging Case
| Power Requirements | Powered by USB-C port (5V/1.5A) |
| Power Capacity | 1200mAh |
| Charging Time | 3 hours |
| Weight | 200g (7.05 oz) |
| Dimensions | 123×102×39.7mm |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | –20°C to +55°C |
Saramonic Wireless Blink 500 Pro B1
Blink500 Pro RX
| Transmission Type: | 2.4GHz Digital Frequency |
| Modulation: | GFSK |
| Operating Range: | Up to 328′(100m) |
| Audio Output Connector: | 3.5mm jack |
| Audio Output level: | –60 dBV to -20dBV |
| Power Requirements: | Built-in Li-ion Battery or
Micro USB DC 5V or Charging Contact |
| Headphone jack: | 3.5mm |
| Built-In Battery Life: | Approx.8 hours |
| Antenna: | PIFA Antenna |
| Weight: | Approx. 32g(1.13oz) |
| Dimensions: | 56×38×29.4mm |
| Operating Temperature: | 0℃ to 50℃ |
| Storage Temperature: | -20℃ to +55℃ |
Blink500 Pro TX
| Transmission Type: | 2.4GHz Digital Frequency |
| Modulation: | GFSK |
| Operating Range: | Up to 328′(100m) |
| RF Output Power: | 10mW |
| Polar Pattern: | Omnidirectional |
| Frequency Response: | 50Hz-18KHz |
| Maximum SPL: | Built-in Microphone:120dB SPL
Lavalier Microphone: 110dB SPL |
| Sensitivity: | Built-in Microphone: -39dB
Lavalier Microphone: -39dB |
| SNR: | ＞78dB |
| Reference audio input level: | -30～42dBv MIC input,0 dB attenuation |
| Power Requirements: | Built-in Li-ion Battery or
Micro USB DC 5V or Charging Contact |
| Built-in Battery Life: | Approx.8 hours |
| Antenna: | PIFA Antenna |
| Audio Inputs: | 3.5mm TRS Lavalier Mic/Line
– in Input or Built – in Microphone |
| Weight: | Approx. 32g(1.13oz) |
| Dimensions: | 56.5×38×26.1mm |
| Operating Temperature: | 0℃ to 50℃ |
| Storage Temperature: | -20℃ to +55℃ |
Blink500 Pro Charging Case
| Power Requirements | Powered by USB-C port (5V/1.5A) |
| Power Capacity | 1200mAh |
| Charging Time | 3 hours |
| Weight | 200g (7.05 oz) |
| Dimensions | 123×102×39.7mm |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | –20°C to +55°C |
Saramonic Wireless Blink 500 B2 Black
Blink500 RX
| Transmission Type: | 2.4GHz Digital Frequency |
| Modulation: | GFSK |
| Audio Output Connector: | 3.5 mm Jack |
| Audio Output level: | –60 dBV |
| Power Requirements: | Built-in Li-ion Battery or USB-C DC 5V |
| Built-In Battery Life: | Approx. 6 hours |
| Antenna: | PIFA Antenna |
| Weight: | Approx. 26.5g (0.93oz) |
| Dimensions: | 62×33×15.5mm |
| Operating Temperature: | 0°C to 50°C |
| Storage Temperature: | –20°C to +55°C |
Blink500 TX
| Transmission Type: | 2.4GHz Digital Frequency |
| Modulation: | GFSK |
| Operating Range: | Up to 164′ (50m) |
| RF Output Power: | 10mW |
| Polar Pattern: | Omnidirectional |
| Frequency Response: | 50Hz-18KHz |
| Maximum SPL: | Built-in Microphone:120dB SPL Lavalier Microphone: 110dB SPL |
| Sensitivity: | Built-in Microphone: -42dB Lavalier Microphone: -30dB |
| SNR: | ＞78dB |
| Power Requirements: | Built-in Li-ion Battery or USB-C DC 5V |
| Built-in Battery Life: | Approx. 6 hours |
| Antenna: | PIFA Antenna |
| Audio Inputs: | 3.5mm TRS Lavalier Microphone Input
or Built-in Microphone |
| Weight: | Approx. 34g (1.2oz) |
| Dimensions: | 63×43×16.5mm |
| Operating Temperature: | 0°C to 50°C |
| Storage Temperature: | –20°C to +55°C |
Saramonic Wireless Blink 500 B1 Black
Blink500 RX
| Transmission Type: | 2.4GHz Digital Frequency |
| Modulation: | GFSK |
| Audio Output Connector: | 3.5 mm Jack |
| Audio Output level: | –60 dBV |
| Power Requirements: | Built-in Li-ion Battery or USB-C DC 5V |
| Built-In Battery Life: | Approx. 6 hours |
| Antenna: | PIFA Antenna |
| Weight: | Approx. 26.5g (0.93oz) |
| Dimensions: | 62×33×15.5mm |
| Operating Temperature: | 0°C to 50°C |
| Storage Temperature: | –20°C to +55°C |
Blink500 TX
| Transmission Type: | 2.4GHz Digital Frequency |
| Modulation: | GFSK |
| Operating Range: | Up to 164′ (50m) |
| RF Output Power: | 10mW |
| Polar Pattern: | Omnidirectional |
| Frequency Response: | 50Hz-18KHz |
| Maximum SPL: | Built-in Microphone:120dB SPL Lavalier Microphone: 110dB SPL |
| Sensitivity: | Built-in Microphone: -42dB Lavalier Microphone: -30dB |
| SNR: | ＞78dB |
| Power Requirements: | Built-in Li-ion Battery or USB-C DC 5V |
| Built-in Battery Life: | Approx. 6 hours |
| Antenna: | PIFA Antenna |
| Audio Inputs: | 3.5mm TRS Lavalier Microphone Input
or Built-in Microphone |
| Weight: | Approx. 34g (1.2oz) |
| Dimensions: | 63×43×16.5mm |
| Operating Temperature: | 0°C to 50°C |
| Storage Temperature: | –20°C to +55°C |
Saramonic Vmic Mini
Type: 14mm Condenser Microphone
Polar Pattern: Cardioid (Uni-Directional)
Frequency Range: 75Hz – 20kHz
Sensitivity: -35 ±3dB (0dB = 1V/Pa, @ 1kHz)
Maximum Input SPL: f=1kHz, THD<5% (105dB)
Output Impedance: 200ohm
Signal to Noise Ratio: 75dB SPL
Weight: 2.43oz (69g)
Dimensions: 4.61 x 0.75 x 2.44” (117 x 19 x 62mm)
Saramonic Vmic
Microphone Type :Condenser Microphone (Unidirectional)
Polar Pattern:Super-cardioid
Frequency Response:35-20kHZ
Sensitivity:-40dB +/- 1dB / 0dB=1V/Pa, 1kHz
Signal to Noise Ratio:75dB or more
Output Impedance:200Ohm or less
Power:Two AA batteries
Plug:Mini-pin plug (3.5mm)
Filter:High-pass filter (150Hz)
Dimensions(L*H*D):255 x 66 x 80 mm
Net Weight:196g (6.9 oz.)
Saramonic UWMIC15 (RX15 + TX15)
Channels: 16
Oscillator Type: PLL synthesizer
Output: 1/8“ (3.5mm) mini jack
Antenna: 1/4 λ wire antenna
Audio Output Level: -60 dBV
Headphone Output Level: 30mW (16 ohm)
Frequency Range: 555 – 579 MHz
Sensitivity: -95 dBm
Signal to Noise Ratio: 70 dB or more
Voice Delay: 12 ms
Reference Deviation: +/- 5 kHz
Frequency Response: 40 Hz to 18 kHz (+/- 3dB)
Distortion: 0.5% or less
Spur Suppression: -60 dB
Power: 2 x AA batteries
Dimensions: 7.1 x 2.5 x 0.9” (180 x 64 x 23 mm)
Weight: 2.58oz (73g) without batteries
TX15 Transmitter Specifications:
Channels:16
Oscillator Type: PLL synthesizer
Carrier Frequencies:555 – 579 MHz
Reference Deviation: +/- 5 kHz
Signal to Noise Ratio: 70 dB or more
Spur Suppression: -60 dB
Voice Delay: 12 ms
Antenna: 1/4 λ wire antenna
Audio Input Connector: 1/8“ (3.5mm) mini jack
Reference Audio Input Level: -60 dBV
Distortion: 0.5% or less
Power: 2 x AA batteries
Dimensions:7.1 x 2.5 x 0.9” (180 x 64 x 23 mm)
Weight: 2.4oz (68g) without batteries
Saramonic SR-WM4C V2
Receiver:
Channels: 4
Operating Frequencies: 203-216MHz (A 203.65 MHz, B 207.75 MHz, C 211.55 MHz, D 215.35 MHz)
Reception Sensitivity: 2 μV for 30 dB S/N
Signal to Noise Ratio: 70dB or more
Antenna: 1/8 λwire antenna
Voice Delay: 12ms
Receiver Output Connector: 1/8” (3.5mm) TRS mini-jack
Current Consumption: 150mA
Batteries: 2 LR6/AA size batteries
Dimensions: 3.96” x 2.44” x 1.76” (100.5 x 62 x 44.7mm)
Weight: 2.8 oz (80g) (without batteries)
Antenna Length: 6.7” (177mm)
Transmitter:
Channels: 4
Operating Frequencies: 203-216MHz (A 203.65 MHz, B 207.75 MHz, C 211.55 MHz, D 215.35 MHz)
Modulation Frequency: Modulation
Modulation Sensitivity: 6 mV input for full deviation
Signal to Noise Ratio: 70dB or more
Antenna: 1/8 λwire antenna
Voice Delay: 12ms
Microphone Input Connector: Mini XLR
Current Consumption: 150mA
Batteries: 2 LR6/AA size batteries
Dimensions: 3.96” x 2.44” x 1.76” (100.5 x 62 x 44.7mm)
Weight: 2.8 oz (80g) (without batteries)
Antenna Length: 6.7” (177mm)
Catch Daily Deals!
Go to Daily Deals SectionTrending products
Trending productsNikon Z 50mm F1.2S
| Principal specifications | ||
|---|---|---|
| Lens type | Prime lens | |
| Max Format size | 35mm FF | |
| Focal length | 50 mm | |
| Image stabilization | No | |
| Lens mount | Nikon Z | |
| Aperture | ||
| Maximum aperture | F1.2 | |
| Minimum aperture | F16 | |
| Aperture ring | No | |
| Number of diaphragm blades | 9 | |
| Optics | ||
| Elements | 17 | |
| Groups | 15 | |
| Special elements / coatings | 2 ED + 3 aspherical elements, Arneo + Nano Crystal coatings | |
| Focus | ||
| Minimum focus | 0.45 m (17.72″) | |
| Maximum magnification | 0.15× | |
| Autofocus | Yes | |
| Motor type | Stepper motor | |
| Full time manual | Yes | |
| Focus method | Internal | |
| Distance scale | Yes | |
| DoF scale | Yes | |
| Physical | ||
| Weight | 1090 g (2.40 lb) | |
| Diameter | 90 mm (3.54″) | |
| Length | 150 mm (5.91″) | |
| Materials | Magnesium alloy | |
| Sealing | Yes | |
| Colour | Black | |
| Filter thread | 82 mm | |
| Hood supplied | Yes | |
| Other | ||
Canon RF 15-35mm F/2.8 L IS USM
| Principal specifications | ||
|---|---|---|
| Lens type | Zoom lens | |
| Max Format size | 35mm FF | |
| Focal length | 15–35 mm | |
| Image stabilization | Yes | |
| CIPA Image stabilization rating | 5 stop(s) | |
| Lens mount | Canon RF | |
| Aperture | ||
| Maximum aperture | F2.8 | |
| Aperture ring | No | |
| Number of diaphragm blades | 9 | |
| Optics | ||
| Elements | 16 | |
| Groups | 12 | |
| Special elements / coatings | 3 aspherical + 2 UD elements | |
| Focus | ||
| Minimum focus | 0.28 m (11.02″) | |
| Maximum magnification | 0.21× | |
| Autofocus | Yes | |
| Motor type | Nano ultrasonic | |
| Full time manual | Yes | |
| Focus method | Internal | |
| Distance scale | No | |
| DoF scale | No | |
| Physical | ||
| Weight | 840 g (1.85 lb) | |
| Diameter | 89 mm (3.5″) | |
| Length | 127 mm (5″) | |
| Materials | Magnesium alloy | |
| Sealing | Yes | |
| Colour | Black | |
| Zoom method | Rotary (extending) | |
| Power zoom | No | |
| Filter thread | 82 mm | |
| Hood supplied | Yes | |
| Other | ||
Canon RF 50mm F/1.2 L USM
| Principal specifications | ||
|---|---|---|
| Lens type | Prime lens | |
| Max Format size | 35mm FF | |
| Focal length | 50 mm | |
| Image stabilization | No | |
| Lens mount | Canon RF | |
| Aperture | ||
| Maximum aperture | F1.2 | |
| Minimum aperture | F16 | |
| Aperture ring | No | |
| Number of diaphragm blades | 10 | |
| Optics | ||
| Elements | 15 | |
| Groups | 9 | |
| Special elements / coatings | Ground aspherical + aspherical + UD elements, Air Sphere and fluorine coatings | |
| Focus | ||
| Minimum focus | 0.40 m (15.75″) | |
| Maximum magnification | 0.19× | |
| Autofocus | Yes | |
| Motor type | Ring-type ultrasonic | |
| Full time manual | Yes | |
| Focus method | Internal | |
| Distance scale | No | |
| DoF scale | No | |
| Physical | ||
| Weight | 950 g (2.09 lb) | |
| Diameter | 90 mm (3.54″) | |
| Length | 108 mm (4.25″) | |
| Sealing | Yes | |
| Colour | Black | |
| Filter thread | 77 mm | |
| Other | ||
Saramonic Wireless Blink 500 Pro B5 (Type-C)
• Dual channel receiver for USB-C devices
• Portable charging case for transmitter and receiver
• Exceptional and broadcast-quality sound
• Ideal for video production, vlogging, mobile journalism and much more
• Quick pairing and easy to get start
• Built-in microphone and an extra SR-M1 lavalier microphone included
• High-contrast OLED display on the transmitter
• LINE IN/MIC input switchable
• Headphone monitoring available
Blink500 Pro TX
| Transmission Type: | 2.4GHz Digital Frequency |
| Modulation: | GFSK |
| Operating Range: | Up to 328′(100m) |
| RF Output Power: | 10mW |
| Polar Pattern: | Omnidirectional |
| Frequency Response: | 50Hz-18KHz |
| Maximum SPL: | Built-in Microphone:120dB SPL
Lavalier Microphone: 110dB SPL |
| Sensitivity: | Built-in Microphone: -39dB
Lavalier Microphone: -39dB |
| SNR: | ＞78dB |
| Reference audio input level: | -30～42dBv MIC input,0 dB attenuation |
| Power Requirements: | Built-in Li-ion Battery or
Micro USB DC 5V or Charging Contact |
| Other Functions: | Mute function High-contrast OLED Display |
| Built-in Battery Life: | Approx.8 hours |
| Antenna: | PIFA Antenna |
| Audio Inputs: | 3.5mm TRS Lavalier Mic/
Line- in Input or Built – in Microphone |
| Weight: | Approx. 32g(1.13oz) |
| Dimensions: | 56.5×38×26.1mm |
| Operating Temperature: | 0℃ to 50℃ |
| Storage Temperature: | -20℃ to +55℃ |
Blink500 Pro RXUC
| Transmission Type: | 2.4GHz Digital Frequency |
| Modulation: | GFSK |
| Operating Range: | Up to 328′(100m) |
| Audio Output Connector | USB-C Connector |
| Power Requirements | Supplied by USB-C Devices |
| Other functions | 3.5mm headphone jack,Mono/Stereo switch |
| Antenna | PIFA Antenna |
| Weight | Approx.16.5g(0.58oz) |
| Dimensions | 31×82×12mm |
| Operating Temperature | 0℃ to 50℃ |
| Storage Temperature | -20℃ to +55℃ |
Blink500 Pro Charging Case
| Power Requirements | Powered by USB-C port (5V/1.5A) |
| Power Capacity | 2000mAh |
| Charging Time | 3 hours |
| Weight | 200g (9.45 oz) |
| Dimensions | 123×102×39.7mm |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | –20°C to +55°C |
Blink500 Pro B5(1×Blink500 Pro RXUC + 1×Blink500 Pro TX)
1×Blink500 Pro RXUC Receiver with USB-C Connector
1×Blink500 Pro TX Transmitter with OLED Display and Built-In Microphone
1×Blink500 Pro B5 Box Charging Case
1×Zipper Bag
1×1′(30.5cm)Gold-Plated USB-C to USB-A Charging Cable
1×1′(30.5cm)Gold-Plated Micro USB to USB-A Charging Cable
1×SR-M1 Omnidirectional Lavalier Microphone
1×Alligator-Style Lavalier Microphone Clip
1×Foam Lavalier Windscreen
1×Warranty Card
1×User Manual
Saramonic Wireless Blink 500 Pro B3 (Lightning)
Blink500 Pro RXDi
| Transmission Type: | 2.4GHz Digital Frequency |
| Modulation: | GFSK |
| Operating Range: | Up to 328′(100m) |
| Audio Output Connector | MFi Certified Lightning connector |
| Power Requirements | Supplied by iOS Devices |
| Other functions | 3.5mm headphone jack,Mono/Stereo switch |
| Antenna | PiFA Antenna |
| Weight | Approx. 16.5g(0.58oz) |
| Dimensions | 31×82×12mm |
| Operating Temperature | 0℃ to 50℃ |
| Storage Temperature | -20℃ to 55℃ |
Blink500 Pro TX
| Transmission Type: | 2.4GHz Digital Frequency |
| Modulation: | GFSK |
| Operating Range: | Up to 328′(100m) |
| RF Output Power: | 10mW |
| Polar Pattern: | Omnidirectional |
| Frequency Response: | 50Hz-18KHz |
| Maximum SPL: | Built-in Microphone:120dB SPL
Lavalier Microphone: 110dB SPL |
| Sensitivity: | Built-in Microphone: -39dB
Lavalier Microphone: -39dB |
| SNR: | ＞78dB |
| Reference audio input level: | -30～42dBv MIC input,0 dB attenuation |
| Power Requirements: | Built-in Li-ion Battery or
Micro USB DC 5V or Charging Contact |
| Other Functions: | Mute function High-contrast OLED Display |
| Built-in Battery Life: | Approx.8 hours |
| Antenna: | PIFA Antenna |
| Audio Inputs: | 3.5mm TRS Lavalier Mic/
Line- in Input or Built – in Microphone |
| Weight: | Approx. 32g(1.13oz) |
| Dimensions: | 56.5×38×26.1mm |
| Operating Temperature: | 0℃ to 50℃ |
| Storage Temperature: | -20℃ to +55℃ |
Blink500 Pro BOX Charging Case
| Power Requirements | Powered by USB-C port (5V/1.5A) |
| Power Capacity | 2000mAh |
| Charging Time | 3 hours |
| Weight | 200g (7.05 oz) |
| Dimensions | 123×102×39.7mm |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | –20°C to +55°C |
Saramonic Dual Wireless Blink 500 Pro B6 (Type-C)
• Dual channel receiver for USB-C devices
• Portable charging case for transmitters and receiver
• Exceptional and broadcast-quality sound
• Ideal for video production, vlogging, mobile journalism and much more
• Quick pairing and easy to get start
• Built-in microphone and two extra SR-M1 lavalier microphones included
• High-contrast OLED display on the transmitters
• Mono/Stereo switchable
• LINE IN/MIC input switchable
• Headphone monitoring available
Blink500 Pro TX
| Transmission Type: | 2.4GHz Digital Frequency |
| Modulation: | GFSK |
| Operating Range: | Up to 328′(100m) |
| RF Output Power: | 10mW |
| Polar Pattern: | Omnidirectional |
| Frequency Response: | 50Hz-18KHz |
| Maximum SPL: | Built-in Microphone:120dB SPL
Lavalier Microphone: 110dB SPL |
| Sensitivity: | Built-in Microphone: -39dB
Lavalier Microphone: -39dB |
| SNR: | ＞78dB |
| Reference audio input level: | -30～42dBv MIC input,0 dB attenuation |
| Power Requirements: | Built-in Li-ion Battery or
Micro USB DC 5V or Charging Contact |
| Other Functions: | Mute function High-contrast OLED Display |
| Built-in Battery Life: | Approx.8 hours |
| Antenna: | PIFA Antenna |
| Audio Inputs: | 3.5mm TRS Lavalier Mic/
Line- in Input or Built – in Microphone |
| Weight: | Approx. 32g(1.13oz) |
| Dimensions: | 56.5×38×26.1mm |
| Operating Temperature: | 0℃ to 50℃ |
| Storage Temperature: | -20℃ to +55℃ |
Blink500 Pro RXUC
| Transmission Type: | 2.4GHz Digital Frequency |
| Modulation: | GFSK |
| Operating Range: | Up to 328′(100m) |
| Audio Output Connector | USB-C Connector |
| Power Requirements | Supplied by USB-C Devices |
| Other functions | 3.5mm headphone jack,Mono/Stereo switch |
| Antenna | PIFA Antenna |
| Weight | Approx.16.5g(0.58oz) |
| Dimensions | 31×82×12mm |
| Operating Temperature | 0℃ to 50℃ |
| Storage Temperature | -20℃ to +55℃ |
Blink500 Pro Charging Case
| Power Requirements | Powered by USB-C port (5V/1.5A) |
| Power Capacity | 3000mAh |
| Charging Time | 4 hours |
| Weight | 268g (9.45 oz) |
| Dimensions | 165.8×102.9×39.7mm |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | –20°C to +55°C |
Saramonic Dual Wireless Blink 500 Pro B4 (Lightning)
Saramonic Dual Wireless Blink 500 Pro B4 (Lightning)
• Dual channel receiver for iOS Lightning devices
• Portable charging case for transmitters and receiver
• Exceptional and broadcast-quality sound
• Ideal for video production, vlogging, mobile journalism and much more
• Quick pairing and easy to get start
• Built-in microphone and two extra SR-M1 lavalier microphones included
• High-contrast OLED display on the transmitters
• Mono/Stereo switchable
• LINE IN/MIC input switchable
• Headphone monitoring available
Blink500 Pro RXDi
| Transmission Type: | 2.4GHz Digital Frequency |
| Modulation: | GFSK |
| Operating Range: | Up to 328′(100m) |
| Audio Output Connector | MFi Certified Lightning connector |
| Power Requirements | Supplied by iOS Devices |
| Other functions | 3.5mm headphone jack,Mono/Stereo switch |
| Antenna | PiFA Antenna |
| Weight | Approx. 16.5g(0.58oz) |
| Dimensions | 31×82×12mm |
| Operating Temperature | 0℃ to 50℃ |
| Storage Temperature | -20℃ to 55℃ |
Blink500 Pro TX
| Transmission Type: | 2.4GHz Digital Frequency |
| Modulation: | GFSK |
| Operating Range: | Up to 328′(100m) |
| RF Output Power: | 10mW |
| Polar Pattern: | Omnidirectional |
| Frequency Response: | 50Hz-18KHz |
| Maximum SPL: | Built-in Microphone:120dB SPL
Lavalier Microphone: 110dB SPL |
| Sensitivity: | Built-in Microphone: -39dB
Lavalier Microphone: -39dB |
| SNR: | ＞78dB |
| Reference audio input level: | -30～42dBv MIC input,0 dB attenuation |
| Power Requirements: | Built-in Li-ion Battery or
Micro USB DC 5V or Charging Contact |
| Other Functions: | mute function High-contrast OLED Display |
| Built-in Battery Life: | Approx.8 hours |
| Antenna: | PIFA Antenna |
| Audio Inputs: | 3.5mm TRS Lavalier Mic/
Line- in Input or Built – in Microphone |
| Weight: | Approx. 32g(1.13oz) |
| Dimensions: | 56.5×38×26.1mm |
| Operating Temperature: | 0℃ to 50℃ |
| Storage Temperature: | -20℃ to +55℃ |
Blink500 Pro BOX Charging Case
| Power Requirements | Powered by USB-C port (5V/1.5A) |
| Power Capacity | 3000mAh |
| Charging Time | 4 hours |
| Weight | 268g (9.45 oz) |
| Dimensions | 165.8×102.9×39.7mm |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | –20°C to +55°C |
Saramonic Wireless Blink 500 B3 (Lightning)
Blink500 TX
| Transmission Type: | 2.4GHz Digital Frequency |
| Modulation: | GFSK |
| Operating Range: | Up to 164′ (50m) |
| RF Output Power: | 10mW |
| Polar Pattern: | Omnidirectional |
| Frequency Response: | 50Hz-18KHz |
| Maximum SPL: | Built-in Microphone:120dB SPL Lavalier Microphone: 110dB SPL |
| Sensitivity: | Built-in Microphone: -42dB Lavalier Microphone: -30dB |
| SNR: | ＞78dB |
| Power Requirements: | Built-in Li-ion Battery or USB-C DC 5V |
| Built-in Battery Life: | Approx. 6 hours |
| Antenna: | PIFA Antenna |
| Audio Inputs: | 3.5mm TRS Lavalier Microphone Input
or Built-in Microphone |
| Weight: | Approx. 34g (1.2oz) |
| Dimensions: | 63×43×16.5mm |
| Operating Temperature: | 0°C to 50°C |
| Storage Temperature: | –20°C to +55°C |
Blink500 RXDi
| Transmission Type: | 2.4GHz Digital Frequency |
| Modulation: | GFSK |
| Operating Range: | Up to 164′ (50m) |
| Audio Output Connector: | MFi Certified Lightning Connector |
| Power Requirement: | Supplied by iOS Device |
| Antenna: | PIFA Antenna |
| Weight: | Approx. 11g (0.38oz) |
| Dimensions: | 76×16.5×11mm |
| Operating Temperature: | 0°C to 50°C |
| Storage Temperature: | –20°C to +55°C |
Saramonic Wireless Blink 500 B5 (Type-C)
Blink500 TX
| Transmission Type: | 2.4GHz Digital Frequency |
| Modulation: | GFSK |
| Operating Range: | Up to 164′ (50m) |
| RF Output Power: | 10mW |
| Polar Pattern: | Omnidirectional |
| Frequency Response: | 50Hz-18KHz |
| Maximum SPL: | Built-in Microphone:120dB SPL Lavalier Microphone: 110dB SPL |
| Sensitivity: | Built-in Microphone: -42dB Lavalier Microphone: -30dB |
| SNR: | ＞78dB |
| Power Requirements: | Built-in Li-ion Battery or USB-C DC 5V |
| Built-in Battery Life: | Approx. 6 hours |
| Antenna: | PIFA Antenna |
| Audio Inputs: | 3.5mm TRS Lavalier Microphone Input
or Built-in Microphone |
| Weight: | Approx. 34g (1.2oz) |
| Dimensions: | 63×43×16.5mm |
| Operating Temperature: | 0°C to 50°C |
| Storage Temperature: | –20°C to +55°C |
Blink500 RXUC
| Transmission Type: | 2.4GHz Digital Frequency |
| Modulation: | GFSK |
| Operating Range: | Up to 164′ (50m) |
| Audio Output Connector: | USB-C Connector |
| Power Requirement: | Supplied by USB-C Device |
| Antenna: | PIFA Antenna |
| Weight: | Approx. 10.5g (0.37oz) |
| Dimensions: | 76×16.5×11mm |
| Operating Temperature: | 0°C to 50°C |
| Storage Temperature: | –20°C to +55°C |
1× Blink500 RXUC Receiver with USB-C Connector
1× Blink500 TX Transmitter with Built-In Microphone and Clip
1× SR-M1 Omnidirectional Lavalier Microphones
1× Alligator-Style Lavalier Microphone Clip
1× Foam Lavalier Windscreen
1× 1’ (30.5 cm) Gold-Plated USB-C to USB-A Charging Cable
1× Pairing Pin
1× Warranty Card
1× User Manual
Saramonic Dual Wireless Blink 500 B6 (Type-C)
Blink500 TX
| Transmission Type: | 2.4GHz Digital Frequency |
| Modulation: | GFSK |
| Operating Range: | Up to 164′ (50m) |
| RF Output Power: | 10mW |
| Polar Pattern: | Omnidirectional |
| Frequency Response: | 50Hz-18KHz |
| Maximum SPL: | Built-in Microphone:120dB SPL Lavalier Microphone: 110dB SPL |
| Sensitivity: | Built-in Microphone: -42dB Lavalier Microphone: -30dB |
| SNR: | ＞78dB |
| Power Requirements: | Built-in Li-ion Battery or USB-C DC 5V |
| Built-in Battery Life: | Approx. 6 hours |
| Antenna: | PIFA Antenna |
| Audio Inputs: | 3.5mm TRS Lavalier Microphone Input
or Built-in Microphone |
| Weight: | Approx. 34g (1.2oz) |
| Dimensions: | 63×43×16.5mm |
| Operating Temperature: | 0°C to 50°C |
| Storage Temperature: | –20°C to +55°C |
Blink500 RXUC
| Transmission Type: | 2.4GHz Digital Frequency |
| Modulation: | GFSK |
| Operating Range: | Up to 164′ (50m) |
| Audio Output Connector: | USB-C Connector |
| Power Requirement: | Supplied by USB-C Device |
| Antenna: | PIFA Antenna |
| Weight: | Approx. 10.5g (0.37oz) |
| Dimensions: | 76×16.5×11mm |
| Operating Temperature: | 0°C to 50°C |
| Storage Temperature: | –20°C to +55°C |
1× Blink500 RXUC Receiver with USB-C Connector
2× Blink500 TX Transmitters with Built-In Microphone and Clip
2× SR-M1 Omnidirectional Lavalier Microphones
2× Alligator-Style Lavalier Microphone Clips
2× Foam Lavalier Windscreens
2× 1’ (30.5 cm) Gold-Plated USB-C to USB-A Charging Cables
1× Pairing Pin
1× Warranty Card
1× User Manual
Saramonic Wireless UWMIC9 Kit 2 (RX9 + 2TX9)
Transmitter
| Channels: | 96 |
| Groups: | A or B |
| Oscillator Type: | PLL Synthesizer |
| Frequency Range: | 514 MHz – 596 MHz |
| Reference Deviation: | +/- 5 kHz (-60dBV, 1kHz input) |
| Signal to Noise Ratio: | 70 dB or more |
| Spur Suppression: | -60 dB |
| Voice Delay: | 12 ms |
| Antenna: | 1/4λ wire antenna |
| Audio input connector: | TX9:3.5mm mini jack
HU9: none TX-XLR9: XLR-3-11C type (female) |
| Reference audio input level: | -60dBV (MIC input, 0dB attenuation) |
| Distortion: | 0.5% or less |
| Weight: | TX9: Approx. 211.4g (excluding batteries)
HU9: Approx. 338.2g (excluding batteries) TX-XLR9: Approx. 138g (Excluding batteries) |
| Battery: | Two AA size batteries |
| Dimensions: | TX9: 170.9 x 63.5 x 30.0 mm HU9: 254.0 x 52.0 x 52.0 mm TX-XLR9: 105.5 x 43 x 34.7 mm |
| Operating temperature: | 0℃ to 50℃ |
| Storage temperature: | -20℃ to +55℃ |
Receiver
| Channels: | 96 |
| Groups: | A or B |
| Oscillator Type: | PLL Synthesizer |
| Audio output connector: | 3.5mm mini jack |
| Antenna: | 1/4λ wire antenna |
| Audio output level: | -60dBV |
| Headphone output level: | 30mW (16Ω) |
| Receiver frequencies: | 514 MHz – 596 MHz |
| Signal to Noise Ratio: | 70 dB or more |
| Voice Delay: | 12 ms |
| Reference Deviation: | +/- 5 kHz (-60dBV, 1kHz input) |
| Frequency response: | 40Hz to 18kHz (+/-3dB) |
| Distortion: | 0.5% or less |
| Spur Suppression: | -60 dB |
| Weight: | 218.7g (Excluding batteries) |
| Battery: | Two AA size batteries |
| Dimensions: | 170.9 x 63.5 x 30.0 mm |
| Operating temperature: | 0℃ to 50℃ |
| Storage temperature: | -20℃ to +55℃ |
Saramonic Wireless UWMIC9 (RX9 + TX9)
Transmitter
| Channels: | 96 |
| Groups: | A or B |
| Oscillator Type: | PLL Synthesizer |
| Frequency Range: | 514 MHz – 596 MHz |
| Reference Deviation: | +/- 5 kHz (-60dBV, 1kHz input) |
| Signal to Noise Ratio: | 70 dB or more |
| Spur Suppression: | -60 dB |
| Voice Delay: | 12 ms |
| Antenna: | 1/4λ wire antenna |
| Audio input connector: | TX9:3.5mm mini jack
HU9: none TX-XLR9: XLR-3-11C type (female) |
| Reference audio input level: | -60dBV (MIC input, 0dB attenuation) |
| Distortion: | 0.5% or less |
| Weight: | TX9: Approx. 211.4g (excluding batteries)
HU9: Approx. 338.2g (excluding batteries) TX-XLR9: Approx. 138g (Excluding batteries) |
| Battery: | Two AA size batteries |
| Dimensions: | TX9: 170.9 x 63.5 x 30.0 mm HU9: 254.0 x 52.0 x 52.0 mm TX-XLR9: 105.5 x 43 x 34.7 mm |
| Operating temperature: | 0℃ to 50℃ |
| Storage temperature: | -20℃ to +55℃ |
Receiver
| Channels: | 96 |
| Groups: | A or B |
| Oscillator Type: | PLL Synthesizer |
| Audio output connector: | 3.5mm mini jack |
| Antenna: | 1/4λ wire antenna |
| Audio output level: | -60dBV |
| Headphone output level: | 30mW (16Ω) |
| Receiver frequencies: | 514 MHz – 596 MHz |
| Signal to Noise Ratio: | 70 dB or more |
| Voice Delay: | 12 ms |
| Reference Deviation: | +/- 5 kHz (-60dBV, 1kHz input) |
| Frequency response: | 40Hz to 18kHz (+/-3dB) |
| Distortion: | 0.5% or less |
| Spur Suppression: | -60 dB |
| Weight: | 218.7g (Excluding batteries) |
| Battery: | Two AA size batteries |
| Dimensions: | 170.9 x 63.5 x 30.0 mm |
| Operating temperature: | 0℃ to 50℃ |
| Storage temperature: | -20℃ to +55℃ |
Saramonic Wireless Blink 500 Pro B2
Blink500 Pro RX
| Transmission Type: | 2.4GHz Digital Frequency |
| Modulation: | GFSK |
| Operating Range: | Up to 328′(100m) |
| Audio Output Connector: | 3.5mm jack |
| Audio Output level: | –60 dBV to -20dBV |
| Power Requirements: | Built-in Li-ion Battery or
Micro USB DC 5V or Charging Contact |
| Headphone jack: | 3.5mm |
| Built-In Battery Life: | Approx.8 hours |
| Antenna: | PIFA Antenna |
| Weight: | Approx. 32g(1.13oz) |
| Dimensions: | 56×38×29.4mm |
| Operating Temperature: | 0℃ to 50℃ |
| Storage Temperature: | -20℃ to +55℃ |
Blink500 Pro TX
| Transmission Type: | 2.4GHz Digital Frequency |
| Modulation: | GFSK |
| Operating Range: | Up to 328′(100m) |
| RF Output Power: | 10mW |
| Polar Pattern: | Omnidirectional |
| Frequency Response: | 50Hz-18KHz |
| Maximum SPL: | Built-in Microphone:120dB SPL
Lavalier Microphone: 110dB SPL |
| Sensitivity: | Built-in Microphone: -39dB
Lavalier Microphone: -39dB |
| SNR: | ＞78dB |
| Reference audio input level: | -30～42dBv MIC input,0 dB attenuation |
| Power Requirements: | Built-in Li-ion Battery or
Micro USB DC 5V or Charging Contact |
| Built-in Battery Life: | Approx.8 hours |
| Antenna: | PIFA Antenna |
| Audio Inputs: | 3.5mm TRS Lavalier Mic/Line
– in Input or Built – in Microphone |
| Weight: | Approx. 32g(1.13oz) |
| Dimensions: | 56.5×38×26.1mm |
| Operating Temperature: | 0℃ to 50℃ |
| Storage Temperature: | -20℃ to +55℃ |
Blink500 Pro Charging Case
| Power Requirements | Powered by USB-C port (5V/1.5A) |
| Power Capacity | 1200mAh |
| Charging Time | 3 hours |
| Weight | 200g (7.05 oz) |
| Dimensions | 123×102×39.7mm |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | –20°C to +55°C |
Saramonic Wireless Blink 500 Pro B1
Blink500 Pro RX
| Transmission Type: | 2.4GHz Digital Frequency |
| Modulation: | GFSK |
| Operating Range: | Up to 328′(100m) |
| Audio Output Connector: | 3.5mm jack |
| Audio Output level: | –60 dBV to -20dBV |
| Power Requirements: | Built-in Li-ion Battery or
Micro USB DC 5V or Charging Contact |
| Headphone jack: | 3.5mm |
| Built-In Battery Life: | Approx.8 hours |
| Antenna: | PIFA Antenna |
| Weight: | Approx. 32g(1.13oz) |
| Dimensions: | 56×38×29.4mm |
| Operating Temperature: | 0℃ to 50℃ |
| Storage Temperature: | -20℃ to +55℃ |
Blink500 Pro TX
| Transmission Type: | 2.4GHz Digital Frequency |
| Modulation: | GFSK |
| Operating Range: | Up to 328′(100m) |
| RF Output Power: | 10mW |
| Polar Pattern: | Omnidirectional |
| Frequency Response: | 50Hz-18KHz |
| Maximum SPL: | Built-in Microphone:120dB SPL
Lavalier Microphone: 110dB SPL |
| Sensitivity: | Built-in Microphone: -39dB
Lavalier Microphone: -39dB |
| SNR: | ＞78dB |
| Reference audio input level: | -30～42dBv MIC input,0 dB attenuation |
| Power Requirements: | Built-in Li-ion Battery or
Micro USB DC 5V or Charging Contact |
| Built-in Battery Life: | Approx.8 hours |
| Antenna: | PIFA Antenna |
| Audio Inputs: | 3.5mm TRS Lavalier Mic/Line
– in Input or Built – in Microphone |
| Weight: | Approx. 32g(1.13oz) |
| Dimensions: | 56.5×38×26.1mm |
| Operating Temperature: | 0℃ to 50℃ |
| Storage Temperature: | -20℃ to +55℃ |
Blink500 Pro Charging Case
| Power Requirements | Powered by USB-C port (5V/1.5A) |
| Power Capacity | 1200mAh |
| Charging Time | 3 hours |
| Weight | 200g (7.05 oz) |
| Dimensions | 123×102×39.7mm |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | –20°C to +55°C |
Saramonic Wireless Blink 500 B2 Black
Blink500 RX
| Transmission Type: | 2.4GHz Digital Frequency |
| Modulation: | GFSK |
| Audio Output Connector: | 3.5 mm Jack |
| Audio Output level: | –60 dBV |
| Power Requirements: | Built-in Li-ion Battery or USB-C DC 5V |
| Built-In Battery Life: | Approx. 6 hours |
| Antenna: | PIFA Antenna |
| Weight: | Approx. 26.5g (0.93oz) |
| Dimensions: | 62×33×15.5mm |
| Operating Temperature: | 0°C to 50°C |
| Storage Temperature: | –20°C to +55°C |
Blink500 TX
| Transmission Type: | 2.4GHz Digital Frequency |
| Modulation: | GFSK |
| Operating Range: | Up to 164′ (50m) |
| RF Output Power: | 10mW |
| Polar Pattern: | Omnidirectional |
| Frequency Response: | 50Hz-18KHz |
| Maximum SPL: | Built-in Microphone:120dB SPL Lavalier Microphone: 110dB SPL |
| Sensitivity: | Built-in Microphone: -42dB Lavalier Microphone: -30dB |
| SNR: | ＞78dB |
| Power Requirements: | Built-in Li-ion Battery or USB-C DC 5V |
| Built-in Battery Life: | Approx. 6 hours |
| Antenna: | PIFA Antenna |
| Audio Inputs: | 3.5mm TRS Lavalier Microphone Input
or Built-in Microphone |
| Weight: | Approx. 34g (1.2oz) |
| Dimensions: | 63×43×16.5mm |
| Operating Temperature: | 0°C to 50°C |
| Storage Temperature: | –20°C to +55°C |
Saramonic Wireless Blink 500 B1 Black
Blink500 RX
| Transmission Type: | 2.4GHz Digital Frequency |
| Modulation: | GFSK |
| Audio Output Connector: | 3.5 mm Jack |
| Audio Output level: | –60 dBV |
| Power Requirements: | Built-in Li-ion Battery or USB-C DC 5V |
| Built-In Battery Life: | Approx. 6 hours |
| Antenna: | PIFA Antenna |
| Weight: | Approx. 26.5g (0.93oz) |
| Dimensions: | 62×33×15.5mm |
| Operating Temperature: | 0°C to 50°C |
| Storage Temperature: | –20°C to +55°C |
Blink500 TX
| Transmission Type: | 2.4GHz Digital Frequency |
| Modulation: | GFSK |
| Operating Range: | Up to 164′ (50m) |
| RF Output Power: | 10mW |
| Polar Pattern: | Omnidirectional |
| Frequency Response: | 50Hz-18KHz |
| Maximum SPL: | Built-in Microphone:120dB SPL Lavalier Microphone: 110dB SPL |
| Sensitivity: | Built-in Microphone: -42dB Lavalier Microphone: -30dB |
| SNR: | ＞78dB |
| Power Requirements: | Built-in Li-ion Battery or USB-C DC 5V |
| Built-in Battery Life: | Approx. 6 hours |
| Antenna: | PIFA Antenna |
| Audio Inputs: | 3.5mm TRS Lavalier Microphone Input
or Built-in Microphone |
| Weight: | Approx. 34g (1.2oz) |
| Dimensions: | 63×43×16.5mm |
| Operating Temperature: | 0°C to 50°C |
| Storage Temperature: | –20°C to +55°C |
Saramonic Vmic Mini
Type: 14mm Condenser Microphone
Polar Pattern: Cardioid (Uni-Directional)
Frequency Range: 75Hz – 20kHz
Sensitivity: -35 ±3dB (0dB = 1V/Pa, @ 1kHz)
Maximum Input SPL: f=1kHz, THD<5% (105dB)
Output Impedance: 200ohm
Signal to Noise Ratio: 75dB SPL
Weight: 2.43oz (69g)
Dimensions: 4.61 x 0.75 x 2.44” (117 x 19 x 62mm)
Saramonic Vmic
Microphone Type :Condenser Microphone (Unidirectional)
Polar Pattern:Super-cardioid
Frequency Response:35-20kHZ
Sensitivity:-40dB +/- 1dB / 0dB=1V/Pa, 1kHz
Signal to Noise Ratio:75dB or more
Output Impedance:200Ohm or less
Power:Two AA batteries
Plug:Mini-pin plug (3.5mm)
Filter:High-pass filter (150Hz)
Dimensions(L*H*D):255 x 66 x 80 mm
Net Weight:196g (6.9 oz.)
Saramonic UWMIC15 (RX15 + TX15)
Channels: 16
Oscillator Type: PLL synthesizer
Output: 1/8“ (3.5mm) mini jack
Antenna: 1/4 λ wire antenna
Audio Output Level: -60 dBV
Headphone Output Level: 30mW (16 ohm)
Frequency Range: 555 – 579 MHz
Sensitivity: -95 dBm
Signal to Noise Ratio: 70 dB or more
Voice Delay: 12 ms
Reference Deviation: +/- 5 kHz
Frequency Response: 40 Hz to 18 kHz (+/- 3dB)
Distortion: 0.5% or less
Spur Suppression: -60 dB
Power: 2 x AA batteries
Dimensions: 7.1 x 2.5 x 0.9” (180 x 64 x 23 mm)
Weight: 2.58oz (73g) without batteries
TX15 Transmitter Specifications:
Channels:16
Oscillator Type: PLL synthesizer
Carrier Frequencies:555 – 579 MHz
Reference Deviation: +/- 5 kHz
Signal to Noise Ratio: 70 dB or more
Spur Suppression: -60 dB
Voice Delay: 12 ms
Antenna: 1/4 λ wire antenna
Audio Input Connector: 1/8“ (3.5mm) mini jack
Reference Audio Input Level: -60 dBV
Distortion: 0.5% or less
Power: 2 x AA batteries
Dimensions:7.1 x 2.5 x 0.9” (180 x 64 x 23 mm)
Weight: 2.4oz (68g) without batteries
Saramonic SR-WM4C V2
Receiver:
Channels: 4
Operating Frequencies: 203-216MHz (A 203.65 MHz, B 207.75 MHz, C 211.55 MHz, D 215.35 MHz)
Reception Sensitivity: 2 μV for 30 dB S/N
Signal to Noise Ratio: 70dB or more
Antenna: 1/8 λwire antenna
Voice Delay: 12ms
Receiver Output Connector: 1/8” (3.5mm) TRS mini-jack
Current Consumption: 150mA
Batteries: 2 LR6/AA size batteries
Dimensions: 3.96” x 2.44” x 1.76” (100.5 x 62 x 44.7mm)
Weight: 2.8 oz (80g) (without batteries)
Antenna Length: 6.7” (177mm)
Transmitter:
Channels: 4
Operating Frequencies: 203-216MHz (A 203.65 MHz, B 207.75 MHz, C 211.55 MHz, D 215.35 MHz)
Modulation Frequency: Modulation
Modulation Sensitivity: 6 mV input for full deviation
Signal to Noise Ratio: 70dB or more
Antenna: 1/8 λwire antenna
Voice Delay: 12ms
Microphone Input Connector: Mini XLR
Current Consumption: 150mA
Batteries: 2 LR6/AA size batteries
Dimensions: 3.96” x 2.44” x 1.76” (100.5 x 62 x 44.7mm)
Weight: 2.8 oz (80g) (without batteries)
Antenna Length: 6.7” (177mm)
Laptops & Computers
Nikon Z 50mm F1.2S
| Principal specifications | ||
|---|---|---|
| Lens type | Prime lens | |
| Max Format size | 35mm FF | |
| Focal length | 50 mm | |
| Image stabilization | No | |
| Lens mount | Nikon Z | |
| Aperture | ||
| Maximum aperture | F1.2 | |
| Minimum aperture | F16 | |
| Aperture ring | No | |
| Number of diaphragm blades | 9 | |
| Optics | ||
| Elements | 17 | |
| Groups | 15 | |
| Special elements / coatings | 2 ED + 3 aspherical elements, Arneo + Nano Crystal coatings | |
| Focus | ||
| Minimum focus | 0.45 m (17.72″) | |
| Maximum magnification | 0.15× | |
| Autofocus | Yes | |
| Motor type | Stepper motor | |
| Full time manual | Yes | |
| Focus method | Internal | |
| Distance scale | Yes | |
| DoF scale | Yes | |
| Physical | ||
| Weight | 1090 g (2.40 lb) | |
| Diameter | 90 mm (3.54″) | |
| Length | 150 mm (5.91″) | |
| Materials | Magnesium alloy | |
| Sealing | Yes | |
| Colour | Black | |
| Filter thread | 82 mm | |
| Hood supplied | Yes | |
| Other | ||
Canon RF 15-35mm F/2.8 L IS USM
| Principal specifications | ||
|---|---|---|
| Lens type | Zoom lens | |
| Max Format size | 35mm FF | |
| Focal length | 15–35 mm | |
| Image stabilization | Yes | |
| CIPA Image stabilization rating | 5 stop(s) | |
| Lens mount | Canon RF | |
| Aperture | ||
| Maximum aperture | F2.8 | |
| Aperture ring | No | |
| Number of diaphragm blades | 9 | |
| Optics | ||
| Elements | 16 | |
| Groups | 12 | |
| Special elements / coatings | 3 aspherical + 2 UD elements | |
| Focus | ||
| Minimum focus | 0.28 m (11.02″) | |
| Maximum magnification | 0.21× | |
| Autofocus | Yes | |
| Motor type | Nano ultrasonic | |
| Full time manual | Yes | |
| Focus method | Internal | |
| Distance scale | No | |
| DoF scale | No | |
| Physical | ||
| Weight | 840 g (1.85 lb) | |
| Diameter | 89 mm (3.5″) | |
| Length | 127 mm (5″) | |
| Materials | Magnesium alloy | |
| Sealing | Yes | |
| Colour | Black | |
| Zoom method | Rotary (extending) | |
| Power zoom | No | |
| Filter thread | 82 mm | |
| Hood supplied | Yes | |
| Other | ||
Canon RF 50mm F/1.2 L USM
| Principal specifications | ||
|---|---|---|
| Lens type | Prime lens | |
| Max Format size | 35mm FF | |
| Focal length | 50 mm | |
| Image stabilization | No | |
| Lens mount | Canon RF | |
| Aperture | ||
| Maximum aperture | F1.2 | |
| Minimum aperture | F16 | |
| Aperture ring | No | |
| Number of diaphragm blades | 10 | |
| Optics | ||
| Elements | 15 | |
| Groups | 9 | |
| Special elements / coatings | Ground aspherical + aspherical + UD elements, Air Sphere and fluorine coatings | |
| Focus | ||
| Minimum focus | 0.40 m (15.75″) | |
| Maximum magnification | 0.19× | |
| Autofocus | Yes | |
| Motor type | Ring-type ultrasonic | |
| Full time manual | Yes | |
| Focus method | Internal | |
| Distance scale | No | |
| DoF scale | No | |
| Physical | ||
| Weight | 950 g (2.09 lb) | |
| Diameter | 90 mm (3.54″) | |
| Length | 108 mm (4.25″) | |
| Sealing | Yes | |
| Colour | Black | |
| Filter thread | 77 mm | |
| Other | ||
Saramonic Wireless Blink 500 Pro B5 (Type-C)
• Dual channel receiver for USB-C devices
• Portable charging case for transmitter and receiver
• Exceptional and broadcast-quality sound
• Ideal for video production, vlogging, mobile journalism and much more
• Quick pairing and easy to get start
• Built-in microphone and an extra SR-M1 lavalier microphone included
• High-contrast OLED display on the transmitter
• LINE IN/MIC input switchable
• Headphone monitoring available
Blink500 Pro TX
| Transmission Type: | 2.4GHz Digital Frequency |
| Modulation: | GFSK |
| Operating Range: | Up to 328′(100m) |
| RF Output Power: | 10mW |
| Polar Pattern: | Omnidirectional |
| Frequency Response: | 50Hz-18KHz |
| Maximum SPL: | Built-in Microphone:120dB SPL
Lavalier Microphone: 110dB SPL |
| Sensitivity: | Built-in Microphone: -39dB
Lavalier Microphone: -39dB |
| SNR: | ＞78dB |
| Reference audio input level: | -30～42dBv MIC input,0 dB attenuation |
| Power Requirements: | Built-in Li-ion Battery or
Micro USB DC 5V or Charging Contact |
| Other Functions: | Mute function High-contrast OLED Display |
| Built-in Battery Life: | Approx.8 hours |
| Antenna: | PIFA Antenna |
| Audio Inputs: | 3.5mm TRS Lavalier Mic/
Line- in Input or Built – in Microphone |
| Weight: | Approx. 32g(1.13oz) |
| Dimensions: | 56.5×38×26.1mm |
| Operating Temperature: | 0℃ to 50℃ |
| Storage Temperature: | -20℃ to +55℃ |
Blink500 Pro RXUC
| Transmission Type: | 2.4GHz Digital Frequency |
| Modulation: | GFSK |
| Operating Range: | Up to 328′(100m) |
| Audio Output Connector | USB-C Connector |
| Power Requirements | Supplied by USB-C Devices |
| Other functions | 3.5mm headphone jack,Mono/Stereo switch |
| Antenna | PIFA Antenna |
| Weight | Approx.16.5g(0.58oz) |
| Dimensions | 31×82×12mm |
| Operating Temperature | 0℃ to 50℃ |
| Storage Temperature | -20℃ to +55℃ |
Blink500 Pro Charging Case
| Power Requirements | Powered by USB-C port (5V/1.5A) |
| Power Capacity | 2000mAh |
| Charging Time | 3 hours |
| Weight | 200g (9.45 oz) |
| Dimensions | 123×102×39.7mm |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | –20°C to +55°C |
Blink500 Pro B5(1×Blink500 Pro RXUC + 1×Blink500 Pro TX)
1×Blink500 Pro RXUC Receiver with USB-C Connector
1×Blink500 Pro TX Transmitter with OLED Display and Built-In Microphone
1×Blink500 Pro B5 Box Charging Case
1×Zipper Bag
1×1′(30.5cm)Gold-Plated USB-C to USB-A Charging Cable
1×1′(30.5cm)Gold-Plated Micro USB to USB-A Charging Cable
1×SR-M1 Omnidirectional Lavalier Microphone
1×Alligator-Style Lavalier Microphone Clip
1×Foam Lavalier Windscreen
1×Warranty Card
1×User Manual
Saramonic Wireless Blink 500 Pro B3 (Lightning)
Blink500 Pro RXDi
| Transmission Type: | 2.4GHz Digital Frequency |
| Modulation: | GFSK |
| Operating Range: | Up to 328′(100m) |
| Audio Output Connector | MFi Certified Lightning connector |
| Power Requirements | Supplied by iOS Devices |
| Other functions | 3.5mm headphone jack,Mono/Stereo switch |
| Antenna | PiFA Antenna |
| Weight | Approx. 16.5g(0.58oz) |
| Dimensions | 31×82×12mm |
| Operating Temperature | 0℃ to 50℃ |
| Storage Temperature | -20℃ to 55℃ |
Blink500 Pro TX
| Transmission Type: | 2.4GHz Digital Frequency |
| Modulation: | GFSK |
| Operating Range: | Up to 328′(100m) |
| RF Output Power: | 10mW |
| Polar Pattern: | Omnidirectional |
| Frequency Response: | 50Hz-18KHz |
| Maximum SPL: | Built-in Microphone:120dB SPL
Lavalier Microphone: 110dB SPL |
| Sensitivity: | Built-in Microphone: -39dB
Lavalier Microphone: -39dB |
| SNR: | ＞78dB |
| Reference audio input level: | -30～42dBv MIC input,0 dB attenuation |
| Power Requirements: | Built-in Li-ion Battery or
Micro USB DC 5V or Charging Contact |
| Other Functions: | Mute function High-contrast OLED Display |
| Built-in Battery Life: | Approx.8 hours |
| Antenna: | PIFA Antenna |
| Audio Inputs: | 3.5mm TRS Lavalier Mic/
Line- in Input or Built – in Microphone |
| Weight: | Approx. 32g(1.13oz) |
| Dimensions: | 56.5×38×26.1mm |
| Operating Temperature: | 0℃ to 50℃ |
| Storage Temperature: | -20℃ to +55℃ |
Blink500 Pro BOX Charging Case
| Power Requirements | Powered by USB-C port (5V/1.5A) |
| Power Capacity | 2000mAh |
| Charging Time | 3 hours |
| Weight | 200g (7.05 oz) |
| Dimensions | 123×102×39.7mm |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | –20°C to +55°C |
Saramonic Dual Wireless Blink 500 Pro B6 (Type-C)
• Dual channel receiver for USB-C devices
• Portable charging case for transmitters and receiver
• Exceptional and broadcast-quality sound
• Ideal for video production, vlogging, mobile journalism and much more
• Quick pairing and easy to get start
• Built-in microphone and two extra SR-M1 lavalier microphones included
• High-contrast OLED display on the transmitters
• Mono/Stereo switchable
• LINE IN/MIC input switchable
• Headphone monitoring available
Blink500 Pro TX
| Transmission Type: | 2.4GHz Digital Frequency |
| Modulation: | GFSK |
| Operating Range: | Up to 328′(100m) |
| RF Output Power: | 10mW |
| Polar Pattern: | Omnidirectional |
| Frequency Response: | 50Hz-18KHz |
| Maximum SPL: | Built-in Microphone:120dB SPL
Lavalier Microphone: 110dB SPL |
| Sensitivity: | Built-in Microphone: -39dB
Lavalier Microphone: -39dB |
| SNR: | ＞78dB |
| Reference audio input level: | -30～42dBv MIC input,0 dB attenuation |
| Power Requirements: | Built-in Li-ion Battery or
Micro USB DC 5V or Charging Contact |
| Other Functions: | Mute function High-contrast OLED Display |
| Built-in Battery Life: | Approx.8 hours |
| Antenna: | PIFA Antenna |
| Audio Inputs: | 3.5mm TRS Lavalier Mic/
Line- in Input or Built – in Microphone |
| Weight: | Approx. 32g(1.13oz) |
| Dimensions: | 56.5×38×26.1mm |
| Operating Temperature: | 0℃ to 50℃ |
| Storage Temperature: | -20℃ to +55℃ |
Blink500 Pro RXUC
| Transmission Type: | 2.4GHz Digital Frequency |
| Modulation: | GFSK |
| Operating Range: | Up to 328′(100m) |
| Audio Output Connector | USB-C Connector |
| Power Requirements | Supplied by USB-C Devices |
| Other functions | 3.5mm headphone jack,Mono/Stereo switch |
| Antenna | PIFA Antenna |
| Weight | Approx.16.5g(0.58oz) |
| Dimensions | 31×82×12mm |
| Operating Temperature | 0℃ to 50℃ |
| Storage Temperature | -20℃ to +55℃ |
Blink500 Pro Charging Case
| Power Requirements | Powered by USB-C port (5V/1.5A) |
| Power Capacity | 3000mAh |
| Charging Time | 4 hours |
| Weight | 268g (9.45 oz) |
| Dimensions | 165.8×102.9×39.7mm |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | –20°C to +55°C |
Saramonic Dual Wireless Blink 500 Pro B4 (Lightning)
Saramonic Dual Wireless Blink 500 Pro B4 (Lightning)
• Dual channel receiver for iOS Lightning devices
• Portable charging case for transmitters and receiver
• Exceptional and broadcast-quality sound
• Ideal for video production, vlogging, mobile journalism and much more
• Quick pairing and easy to get start
• Built-in microphone and two extra SR-M1 lavalier microphones included
• High-contrast OLED display on the transmitters
• Mono/Stereo switchable
• LINE IN/MIC input switchable
• Headphone monitoring available
Blink500 Pro RXDi
| Transmission Type: | 2.4GHz Digital Frequency |
| Modulation: | GFSK |
| Operating Range: | Up to 328′(100m) |
| Audio Output Connector | MFi Certified Lightning connector |
| Power Requirements | Supplied by iOS Devices |
| Other functions | 3.5mm headphone jack,Mono/Stereo switch |
| Antenna | PiFA Antenna |
| Weight | Approx. 16.5g(0.58oz) |
| Dimensions | 31×82×12mm |
| Operating Temperature | 0℃ to 50℃ |
| Storage Temperature | -20℃ to 55℃ |
Blink500 Pro TX
| Transmission Type: | 2.4GHz Digital Frequency |
| Modulation: | GFSK |
| Operating Range: | Up to 328′(100m) |
| RF Output Power: | 10mW |
| Polar Pattern: | Omnidirectional |
| Frequency Response: | 50Hz-18KHz |
| Maximum SPL: | Built-in Microphone:120dB SPL
Lavalier Microphone: 110dB SPL |
| Sensitivity: | Built-in Microphone: -39dB
Lavalier Microphone: -39dB |
| SNR: | ＞78dB |
| Reference audio input level: | -30～42dBv MIC input,0 dB attenuation |
| Power Requirements: | Built-in Li-ion Battery or
Micro USB DC 5V or Charging Contact |
| Other Functions: | mute function High-contrast OLED Display |
| Built-in Battery Life: | Approx.8 hours |
| Antenna: | PIFA Antenna |
| Audio Inputs: | 3.5mm TRS Lavalier Mic/
Line- in Input or Built – in Microphone |
| Weight: | Approx. 32g(1.13oz) |
| Dimensions: | 56.5×38×26.1mm |
| Operating Temperature: | 0℃ to 50℃ |
| Storage Temperature: | -20℃ to +55℃ |
Blink500 Pro BOX Charging Case
| Power Requirements | Powered by USB-C port (5V/1.5A) |
| Power Capacity | 3000mAh |
| Charging Time | 4 hours |
| Weight | 268g (9.45 oz) |
| Dimensions | 165.8×102.9×39.7mm |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | –20°C to +55°C |
Saramonic Wireless Blink 500 B3 (Lightning)
Blink500 TX
| Transmission Type: | 2.4GHz Digital Frequency |
| Modulation: | GFSK |
| Operating Range: | Up to 164′ (50m) |
| RF Output Power: | 10mW |
| Polar Pattern: | Omnidirectional |
| Frequency Response: | 50Hz-18KHz |
| Maximum SPL: | Built-in Microphone:120dB SPL Lavalier Microphone: 110dB SPL |
| Sensitivity: | Built-in Microphone: -42dB Lavalier Microphone: -30dB |
| SNR: | ＞78dB |
| Power Requirements: | Built-in Li-ion Battery or USB-C DC 5V |
| Built-in Battery Life: | Approx. 6 hours |
| Antenna: | PIFA Antenna |
| Audio Inputs: | 3.5mm TRS Lavalier Microphone Input
or Built-in Microphone |
| Weight: | Approx. 34g (1.2oz) |
| Dimensions: | 63×43×16.5mm |
| Operating Temperature: | 0°C to 50°C |
| Storage Temperature: | –20°C to +55°C |
Blink500 RXDi
| Transmission Type: | 2.4GHz Digital Frequency |
| Modulation: | GFSK |
| Operating Range: | Up to 164′ (50m) |
| Audio Output Connector: | MFi Certified Lightning Connector |
| Power Requirement: | Supplied by iOS Device |
| Antenna: | PIFA Antenna |
| Weight: | Approx. 11g (0.38oz) |
| Dimensions: | 76×16.5×11mm |
| Operating Temperature: | 0°C to 50°C |
| Storage Temperature: | –20°C to +55°C |
Saramonic Wireless Blink 500 B5 (Type-C)
Blink500 TX
| Transmission Type: | 2.4GHz Digital Frequency |
| Modulation: | GFSK |
| Operating Range: | Up to 164′ (50m) |
| RF Output Power: | 10mW |
| Polar Pattern: | Omnidirectional |
| Frequency Response: | 50Hz-18KHz |
| Maximum SPL: | Built-in Microphone:120dB SPL Lavalier Microphone: 110dB SPL |
| Sensitivity: | Built-in Microphone: -42dB Lavalier Microphone: -30dB |
| SNR: | ＞78dB |
| Power Requirements: | Built-in Li-ion Battery or USB-C DC 5V |
| Built-in Battery Life: | Approx. 6 hours |
| Antenna: | PIFA Antenna |
| Audio Inputs: | 3.5mm TRS Lavalier Microphone Input
or Built-in Microphone |
| Weight: | Approx. 34g (1.2oz) |
| Dimensions: | 63×43×16.5mm |
| Operating Temperature: | 0°C to 50°C |
| Storage Temperature: | –20°C to +55°C |
Blink500 RXUC
| Transmission Type: | 2.4GHz Digital Frequency |
| Modulation: | GFSK |
| Operating Range: | Up to 164′ (50m) |
| Audio Output Connector: | USB-C Connector |
| Power Requirement: | Supplied by USB-C Device |
| Antenna: | PIFA Antenna |
| Weight: | Approx. 10.5g (0.37oz) |
| Dimensions: | 76×16.5×11mm |
| Operating Temperature: | 0°C to 50°C |
| Storage Temperature: | –20°C to +55°C |
1× Blink500 RXUC Receiver with USB-C Connector
1× Blink500 TX Transmitter with Built-In Microphone and Clip
1× SR-M1 Omnidirectional Lavalier Microphones
1× Alligator-Style Lavalier Microphone Clip
1× Foam Lavalier Windscreen
1× 1’ (30.5 cm) Gold-Plated USB-C to USB-A Charging Cable
1× Pairing Pin
1× Warranty Card
1× User Manual
Saramonic Dual Wireless Blink 500 B6 (Type-C)
Blink500 TX
| Transmission Type: | 2.4GHz Digital Frequency |
| Modulation: | GFSK |
| Operating Range: | Up to 164′ (50m) |
| RF Output Power: | 10mW |
| Polar Pattern: | Omnidirectional |
| Frequency Response: | 50Hz-18KHz |
| Maximum SPL: | Built-in Microphone:120dB SPL Lavalier Microphone: 110dB SPL |
| Sensitivity: | Built-in Microphone: -42dB Lavalier Microphone: -30dB |
| SNR: | ＞78dB |
| Power Requirements: | Built-in Li-ion Battery or USB-C DC 5V |
| Built-in Battery Life: | Approx. 6 hours |
| Antenna: | PIFA Antenna |
| Audio Inputs: | 3.5mm TRS Lavalier Microphone Input
or Built-in Microphone |
| Weight: | Approx. 34g (1.2oz) |
| Dimensions: | 63×43×16.5mm |
| Operating Temperature: | 0°C to 50°C |
| Storage Temperature: | –20°C to +55°C |
Blink500 RXUC
| Transmission Type: | 2.4GHz Digital Frequency |
| Modulation: | GFSK |
| Operating Range: | Up to 164′ (50m) |
| Audio Output Connector: | USB-C Connector |
| Power Requirement: | Supplied by USB-C Device |
| Antenna: | PIFA Antenna |
| Weight: | Approx. 10.5g (0.37oz) |
| Dimensions: | 76×16.5×11mm |
| Operating Temperature: | 0°C to 50°C |
| Storage Temperature: | –20°C to +55°C |
1× Blink500 RXUC Receiver with USB-C Connector
2× Blink500 TX Transmitters with Built-In Microphone and Clip
2× SR-M1 Omnidirectional Lavalier Microphones
2× Alligator-Style Lavalier Microphone Clips
2× Foam Lavalier Windscreens
2× 1’ (30.5 cm) Gold-Plated USB-C to USB-A Charging Cables
1× Pairing Pin
1× Warranty Card
1× User Manual
Saramonic Wireless UWMIC9 Kit 2 (RX9 + 2TX9)
Transmitter
| Channels: | 96 |
| Groups: | A or B |
| Oscillator Type: | PLL Synthesizer |
| Frequency Range: | 514 MHz – 596 MHz |
| Reference Deviation: | +/- 5 kHz (-60dBV, 1kHz input) |
| Signal to Noise Ratio: | 70 dB or more |
| Spur Suppression: | -60 dB |
| Voice Delay: | 12 ms |
| Antenna: | 1/4λ wire antenna |
| Audio input connector: | TX9:3.5mm mini jack
HU9: none TX-XLR9: XLR-3-11C type (female) |
| Reference audio input level: | -60dBV (MIC input, 0dB attenuation) |
| Distortion: | 0.5% or less |
| Weight: | TX9: Approx. 211.4g (excluding batteries)
HU9: Approx. 338.2g (excluding batteries) TX-XLR9: Approx. 138g (Excluding batteries) |
| Battery: | Two AA size batteries |
| Dimensions: | TX9: 170.9 x 63.5 x 30.0 mm HU9: 254.0 x 52.0 x 52.0 mm TX-XLR9: 105.5 x 43 x 34.7 mm |
| Operating temperature: | 0℃ to 50℃ |
| Storage temperature: | -20℃ to +55℃ |
Receiver
| Channels: | 96 |
| Groups: | A or B |
| Oscillator Type: | PLL Synthesizer |
| Audio output connector: | 3.5mm mini jack |
| Antenna: | 1/4λ wire antenna |
| Audio output level: | -60dBV |
| Headphone output level: | 30mW (16Ω) |
| Receiver frequencies: | 514 MHz – 596 MHz |
| Signal to Noise Ratio: | 70 dB or more |
| Voice Delay: | 12 ms |
| Reference Deviation: | +/- 5 kHz (-60dBV, 1kHz input) |
| Frequency response: | 40Hz to 18kHz (+/-3dB) |
| Distortion: | 0.5% or less |
| Spur Suppression: | -60 dB |
| Weight: | 218.7g (Excluding batteries) |
| Battery: | Two AA size batteries |
| Dimensions: | 170.9 x 63.5 x 30.0 mm |
| Operating temperature: | 0℃ to 50℃ |
| Storage temperature: | -20℃ to +55℃ |
Saramonic Wireless UWMIC9 (RX9 + TX9)
Transmitter
| Channels: | 96 |
| Groups: | A or B |
| Oscillator Type: | PLL Synthesizer |
| Frequency Range: | 514 MHz – 596 MHz |
| Reference Deviation: | +/- 5 kHz (-60dBV, 1kHz input) |
| Signal to Noise Ratio: | 70 dB or more |
| Spur Suppression: | -60 dB |
| Voice Delay: | 12 ms |
| Antenna: | 1/4λ wire antenna |
| Audio input connector: | TX9:3.5mm mini jack
HU9: none TX-XLR9: XLR-3-11C type (female) |
| Reference audio input level: | -60dBV (MIC input, 0dB attenuation) |
| Distortion: | 0.5% or less |
| Weight: | TX9: Approx. 211.4g (excluding batteries)
HU9: Approx. 338.2g (excluding batteries) TX-XLR9: Approx. 138g (Excluding batteries) |
| Battery: | Two AA size batteries |
| Dimensions: | TX9: 170.9 x 63.5 x 30.0 mm HU9: 254.0 x 52.0 x 52.0 mm TX-XLR9: 105.5 x 43 x 34.7 mm |
| Operating temperature: | 0℃ to 50℃ |
| Storage temperature: | -20℃ to +55℃ |
Receiver
| Channels: | 96 |
| Groups: | A or B |
| Oscillator Type: | PLL Synthesizer |
| Audio output connector: | 3.5mm mini jack |
| Antenna: | 1/4λ wire antenna |
| Audio output level: | -60dBV |
| Headphone output level: | 30mW (16Ω) |
| Receiver frequencies: | 514 MHz – 596 MHz |
| Signal to Noise Ratio: | 70 dB or more |
| Voice Delay: | 12 ms |
| Reference Deviation: | +/- 5 kHz (-60dBV, 1kHz input) |
| Frequency response: | 40Hz to 18kHz (+/-3dB) |
| Distortion: | 0.5% or less |
| Spur Suppression: | -60 dB |
| Weight: | 218.7g (Excluding batteries) |
| Battery: | Two AA size batteries |
| Dimensions: | 170.9 x 63.5 x 30.0 mm |
| Operating temperature: | 0℃ to 50℃ |
| Storage temperature: | -20℃ to +55℃ |
Smartphones & Tablets
Nikon Z 50mm F1.2S
| Principal specifications | ||
|---|---|---|
| Lens type | Prime lens | |
| Max Format size | 35mm FF | |
| Focal length | 50 mm | |
| Image stabilization | No | |
| Lens mount | Nikon Z | |
| Aperture | ||
| Maximum aperture | F1.2 | |
| Minimum aperture | F16 | |
| Aperture ring | No | |
| Number of diaphragm blades | 9 | |
| Optics | ||
| Elements | 17 | |
| Groups | 15 | |
| Special elements / coatings | 2 ED + 3 aspherical elements, Arneo + Nano Crystal coatings | |
| Focus | ||
| Minimum focus | 0.45 m (17.72″) | |
| Maximum magnification | 0.15× | |
| Autofocus | Yes | |
| Motor type | Stepper motor | |
| Full time manual | Yes | |
| Focus method | Internal | |
| Distance scale | Yes | |
| DoF scale | Yes | |
| Physical | ||
| Weight | 1090 g (2.40 lb) | |
| Diameter | 90 mm (3.54″) | |
| Length | 150 mm (5.91″) | |
| Materials | Magnesium alloy | |
| Sealing | Yes | |
| Colour | Black | |
| Filter thread | 82 mm | |
| Hood supplied | Yes | |
| Other | ||
Canon RF 15-35mm F/2.8 L IS USM
| Principal specifications | ||
|---|---|---|
| Lens type | Zoom lens | |
| Max Format size | 35mm FF | |
| Focal length | 15–35 mm | |
| Image stabilization | Yes | |
| CIPA Image stabilization rating | 5 stop(s) | |
| Lens mount | Canon RF | |
| Aperture | ||
| Maximum aperture | F2.8 | |
| Aperture ring | No | |
| Number of diaphragm blades | 9 | |
| Optics | ||
| Elements | 16 | |
| Groups | 12 | |
| Special elements / coatings | 3 aspherical + 2 UD elements | |
| Focus | ||
| Minimum focus | 0.28 m (11.02″) | |
| Maximum magnification | 0.21× | |
| Autofocus | Yes | |
| Motor type | Nano ultrasonic | |
| Full time manual | Yes | |
| Focus method | Internal | |
| Distance scale | No | |
| DoF scale | No | |
| Physical | ||
| Weight | 840 g (1.85 lb) | |
| Diameter | 89 mm (3.5″) | |
| Length | 127 mm (5″) | |
| Materials | Magnesium alloy | |
| Sealing | Yes | |
| Colour | Black | |
| Zoom method | Rotary (extending) | |
| Power zoom | No | |
| Filter thread | 82 mm | |
| Hood supplied | Yes | |
| Other | ||
Canon RF 50mm F/1.2 L USM
| Principal specifications | ||
|---|---|---|
| Lens type | Prime lens | |
| Max Format size | 35mm FF | |
| Focal length | 50 mm | |
| Image stabilization | No | |
| Lens mount | Canon RF | |
| Aperture | ||
| Maximum aperture | F1.2 | |
| Minimum aperture | F16 | |
| Aperture ring | No | |
| Number of diaphragm blades | 10 | |
| Optics | ||
| Elements | 15 | |
| Groups | 9 | |
| Special elements / coatings | Ground aspherical + aspherical + UD elements, Air Sphere and fluorine coatings | |
| Focus | ||
| Minimum focus | 0.40 m (15.75″) | |
| Maximum magnification | 0.19× | |
| Autofocus | Yes | |
| Motor type | Ring-type ultrasonic | |
| Full time manual | Yes | |
| Focus method | Internal | |
| Distance scale | No | |
| DoF scale | No | |
| Physical | ||
| Weight | 950 g (2.09 lb) | |
| Diameter | 90 mm (3.54″) | |
| Length | 108 mm (4.25″) | |
| Sealing | Yes | |
| Colour | Black | |
| Filter thread | 77 mm | |
| Other | ||
Saramonic Wireless Blink 500 Pro B5 (Type-C)
• Dual channel receiver for USB-C devices
• Portable charging case for transmitter and receiver
• Exceptional and broadcast-quality sound
• Ideal for video production, vlogging, mobile journalism and much more
• Quick pairing and easy to get start
• Built-in microphone and an extra SR-M1 lavalier microphone included
• High-contrast OLED display on the transmitter
• LINE IN/MIC input switchable
• Headphone monitoring available
Blink500 Pro TX
| Transmission Type: | 2.4GHz Digital Frequency |
| Modulation: | GFSK |
| Operating Range: | Up to 328′(100m) |
| RF Output Power: | 10mW |
| Polar Pattern: | Omnidirectional |
| Frequency Response: | 50Hz-18KHz |
| Maximum SPL: | Built-in Microphone:120dB SPL
Lavalier Microphone: 110dB SPL |
| Sensitivity: | Built-in Microphone: -39dB
Lavalier Microphone: -39dB |
| SNR: | ＞78dB |
| Reference audio input level: | -30～42dBv MIC input,0 dB attenuation |
| Power Requirements: | Built-in Li-ion Battery or
Micro USB DC 5V or Charging Contact |
| Other Functions: | Mute function High-contrast OLED Display |
| Built-in Battery Life: | Approx.8 hours |
| Antenna: | PIFA Antenna |
| Audio Inputs: | 3.5mm TRS Lavalier Mic/
Line- in Input or Built – in Microphone |
| Weight: | Approx. 32g(1.13oz) |
| Dimensions: | 56.5×38×26.1mm |
| Operating Temperature: | 0℃ to 50℃ |
| Storage Temperature: | -20℃ to +55℃ |
Blink500 Pro RXUC
| Transmission Type: | 2.4GHz Digital Frequency |
| Modulation: | GFSK |
| Operating Range: | Up to 328′(100m) |
| Audio Output Connector | USB-C Connector |
| Power Requirements | Supplied by USB-C Devices |
| Other functions | 3.5mm headphone jack,Mono/Stereo switch |
| Antenna | PIFA Antenna |
| Weight | Approx.16.5g(0.58oz) |
| Dimensions | 31×82×12mm |
| Operating Temperature | 0℃ to 50℃ |
| Storage Temperature | -20℃ to +55℃ |
Blink500 Pro Charging Case
| Power Requirements | Powered by USB-C port (5V/1.5A) |
| Power Capacity | 2000mAh |
| Charging Time | 3 hours |
| Weight | 200g (9.45 oz) |
| Dimensions | 123×102×39.7mm |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | –20°C to +55°C |
Blink500 Pro B5(1×Blink500 Pro RXUC + 1×Blink500 Pro TX)
1×Blink500 Pro RXUC Receiver with USB-C Connector
1×Blink500 Pro TX Transmitter with OLED Display and Built-In Microphone
1×Blink500 Pro B5 Box Charging Case
1×Zipper Bag
1×1′(30.5cm)Gold-Plated USB-C to USB-A Charging Cable
1×1′(30.5cm)Gold-Plated Micro USB to USB-A Charging Cable
1×SR-M1 Omnidirectional Lavalier Microphone
1×Alligator-Style Lavalier Microphone Clip
1×Foam Lavalier Windscreen
1×Warranty Card
1×User Manual
Saramonic Wireless Blink 500 Pro B3 (Lightning)
Blink500 Pro RXDi
| Transmission Type: | 2.4GHz Digital Frequency |
| Modulation: | GFSK |
| Operating Range: | Up to 328′(100m) |
| Audio Output Connector | MFi Certified Lightning connector |
| Power Requirements | Supplied by iOS Devices |
| Other functions | 3.5mm headphone jack,Mono/Stereo switch |
| Antenna | PiFA Antenna |
| Weight | Approx. 16.5g(0.58oz) |
| Dimensions | 31×82×12mm |
| Operating Temperature | 0℃ to 50℃ |
| Storage Temperature | -20℃ to 55℃ |
Blink500 Pro TX
| Transmission Type: | 2.4GHz Digital Frequency |
| Modulation: | GFSK |
| Operating Range: | Up to 328′(100m) |
| RF Output Power: | 10mW |
| Polar Pattern: | Omnidirectional |
| Frequency Response: | 50Hz-18KHz |
| Maximum SPL: | Built-in Microphone:120dB SPL
Lavalier Microphone: 110dB SPL |
| Sensitivity: | Built-in Microphone: -39dB
Lavalier Microphone: -39dB |
| SNR: | ＞78dB |
| Reference audio input level: | -30～42dBv MIC input,0 dB attenuation |
| Power Requirements: | Built-in Li-ion Battery or
Micro USB DC 5V or Charging Contact |
| Other Functions: | Mute function High-contrast OLED Display |
| Built-in Battery Life: | Approx.8 hours |
| Antenna: | PIFA Antenna |
| Audio Inputs: | 3.5mm TRS Lavalier Mic/
Line- in Input or Built – in Microphone |
| Weight: | Approx. 32g(1.13oz) |
| Dimensions: | 56.5×38×26.1mm |
| Operating Temperature: | 0℃ to 50℃ |
| Storage Temperature: | -20℃ to +55℃ |
Blink500 Pro BOX Charging Case
| Power Requirements | Powered by USB-C port (5V/1.5A) |
| Power Capacity | 2000mAh |
| Charging Time | 3 hours |
| Weight | 200g (7.05 oz) |
| Dimensions | 123×102×39.7mm |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | –20°C to +55°C |
Saramonic Dual Wireless Blink 500 Pro B6 (Type-C)
• Dual channel receiver for USB-C devices
• Portable charging case for transmitters and receiver
• Exceptional and broadcast-quality sound
• Ideal for video production, vlogging, mobile journalism and much more
• Quick pairing and easy to get start
• Built-in microphone and two extra SR-M1 lavalier microphones included
• High-contrast OLED display on the transmitters
• Mono/Stereo switchable
• LINE IN/MIC input switchable
• Headphone monitoring available
Blink500 Pro TX
| Transmission Type: | 2.4GHz Digital Frequency |
| Modulation: | GFSK |
| Operating Range: | Up to 328′(100m) |
| RF Output Power: | 10mW |
| Polar Pattern: | Omnidirectional |
| Frequency Response: | 50Hz-18KHz |
| Maximum SPL: | Built-in Microphone:120dB SPL
Lavalier Microphone: 110dB SPL |
| Sensitivity: | Built-in Microphone: -39dB
Lavalier Microphone: -39dB |
| SNR: | ＞78dB |
| Reference audio input level: | -30～42dBv MIC input,0 dB attenuation |
| Power Requirements: | Built-in Li-ion Battery or
Micro USB DC 5V or Charging Contact |
| Other Functions: | Mute function High-contrast OLED Display |
| Built-in Battery Life: | Approx.8 hours |
| Antenna: | PIFA Antenna |
| Audio Inputs: | 3.5mm TRS Lavalier Mic/
Line- in Input or Built – in Microphone |
| Weight: | Approx. 32g(1.13oz) |
| Dimensions: | 56.5×38×26.1mm |
| Operating Temperature: | 0℃ to 50℃ |
| Storage Temperature: | -20℃ to +55℃ |
Blink500 Pro RXUC
| Transmission Type: | 2.4GHz Digital Frequency |
| Modulation: | GFSK |
| Operating Range: | Up to 328′(100m) |
| Audio Output Connector | USB-C Connector |
| Power Requirements | Supplied by USB-C Devices |
| Other functions | 3.5mm headphone jack,Mono/Stereo switch |
| Antenna | PIFA Antenna |
| Weight | Approx.16.5g(0.58oz) |
| Dimensions | 31×82×12mm |
| Operating Temperature | 0℃ to 50℃ |
| Storage Temperature | -20℃ to +55℃ |
Blink500 Pro Charging Case
| Power Requirements | Powered by USB-C port (5V/1.5A) |
| Power Capacity | 3000mAh |
| Charging Time | 4 hours |
| Weight | 268g (9.45 oz) |
| Dimensions | 165.8×102.9×39.7mm |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | –20°C to +55°C |
Saramonic Dual Wireless Blink 500 Pro B4 (Lightning)
Saramonic Dual Wireless Blink 500 Pro B4 (Lightning)
• Dual channel receiver for iOS Lightning devices
• Portable charging case for transmitters and receiver
• Exceptional and broadcast-quality sound
• Ideal for video production, vlogging, mobile journalism and much more
• Quick pairing and easy to get start
• Built-in microphone and two extra SR-M1 lavalier microphones included
• High-contrast OLED display on the transmitters
• Mono/Stereo switchable
• LINE IN/MIC input switchable
• Headphone monitoring available
Blink500 Pro RXDi
| Transmission Type: | 2.4GHz Digital Frequency |
| Modulation: | GFSK |
| Operating Range: | Up to 328′(100m) |
| Audio Output Connector | MFi Certified Lightning connector |
| Power Requirements | Supplied by iOS Devices |
| Other functions | 3.5mm headphone jack,Mono/Stereo switch |
| Antenna | PiFA Antenna |
| Weight | Approx. 16.5g(0.58oz) |
| Dimensions | 31×82×12mm |
| Operating Temperature | 0℃ to 50℃ |
| Storage Temperature | -20℃ to 55℃ |
Blink500 Pro TX
| Transmission Type: | 2.4GHz Digital Frequency |
| Modulation: | GFSK |
| Operating Range: | Up to 328′(100m) |
| RF Output Power: | 10mW |
| Polar Pattern: | Omnidirectional |
| Frequency Response: | 50Hz-18KHz |
| Maximum SPL: | Built-in Microphone:120dB SPL
Lavalier Microphone: 110dB SPL |
| Sensitivity: | Built-in Microphone: -39dB
Lavalier Microphone: -39dB |
| SNR: | ＞78dB |
| Reference audio input level: | -30～42dBv MIC input,0 dB attenuation |
| Power Requirements: | Built-in Li-ion Battery or
Micro USB DC 5V or Charging Contact |
| Other Functions: | mute function High-contrast OLED Display |
| Built-in Battery Life: | Approx.8 hours |
| Antenna: | PIFA Antenna |
| Audio Inputs: | 3.5mm TRS Lavalier Mic/
Line- in Input or Built – in Microphone |
| Weight: | Approx. 32g(1.13oz) |
| Dimensions: | 56.5×38×26.1mm |
| Operating Temperature: | 0℃ to 50℃ |
| Storage Temperature: | -20℃ to +55℃ |
Blink500 Pro BOX Charging Case
| Power Requirements | Powered by USB-C port (5V/1.5A) |
| Power Capacity | 3000mAh |
| Charging Time | 4 hours |
| Weight | 268g (9.45 oz) |
| Dimensions | 165.8×102.9×39.7mm |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | –20°C to +55°C |